Interfacial microstructure and mechanical properties of tungsten alloy/steel diffusion bonding joint using CrFeCoNiCu high entropy alloy interlayer
M Zhang, W Zhu, S Meng, W Liu, Y Ma, J Wang… - Materials …, 2023 - Elsevier
In this paper, an innovative design of CrFeCoNiCu high entropy alloy (HEA) interlayer was
selected to produce high-strength diffusion bonding joints of 93W-4.9 Ni-2.1 Fe tungsten …
selected to produce high-strength diffusion bonding joints of 93W-4.9 Ni-2.1 Fe tungsten …
Accelerated phase growth kinetics during interdiffusion of ultrafine-grained Ni and Sn
The phase growth is investigated during the interdiffusion of an ultra-fine grained Ni
(UFG)(grain size, d∼ 320 nm) and coarse-grained Sn diffusion couple in the temperature …
(UFG)(grain size, d∼ 320 nm) and coarse-grained Sn diffusion couple in the temperature …
Analysis of Ni interlayer effects on laser beam welding of dissimilar pure Mo alloy to stainless steel
X Gao, L Li, J Liu, X Wang, H Yu - … Journal of Refractory Metals and Hard …, 2021 - Elsevier
The effect of Ni interlayer thickness on chemical composition, microstructure and mechanical
properties of laser welding of Mo and stainless steel was analyzed systematically …
properties of laser welding of Mo and stainless steel was analyzed systematically …
A New Experimental Finding of 3 Separate Phase Fields of Ε, Ε1, Ε2 And The Estimation of Diffusion Parameters in the Mn–Zn System
S Yadav, VA Baheti - Ε1, Ε2 And The Estimation of Diffusion Parameters … - papers.ssrn.com
Mn–Zn system, technologically crucial for galvanized Mn–containing steels and potential
ZnMn–based biomaterials, has been studied using conventional diffusion couple technique …
ZnMn–based biomaterials, has been studied using conventional diffusion couple technique …
A New Experimental Finding of 3 Separate Phase Fields of Ε, Ε1, Ε2 And the Estimation of Diffusion Coefficients in the Mn–Zn System
S Yadav, VA Baheti - Ε1, Ε2 And the Estimation of Diffusion Coefficients in … - papers.ssrn.com
Abstract The Mn–Zn system, technologically crucial for galvanized Mn–containing steels and
potential ZnMn–based biomaterials, has been studied using the conventional diffusion …
potential ZnMn–based biomaterials, has been studied using the conventional diffusion …
Fe-Mo-B esaslı sert dolgu elektrotların üretimi ve özelliklerinin incelenmesi= Production of Fe-Mo-B based hardfacing electrodes and investigation of their properties
GN Kurhan - 2021 - acikerisim.sakarya.edu.tr
Bu çalışmada, dört farklı bileşim sahip olan Fe-Mo-B esaslı sert dolgu elektrotları üretilerek,
elektrik ark kaynağı yöntemi ile sert yüzey alaşımlama işlemi AISI 1010 çelik altlık üzerine …
elektrik ark kaynağı yöntemi ile sert yüzey alaşımlama işlemi AISI 1010 çelik altlık üzerine …
Кінетики спікання сплаву Fe-20% Mo
ЛЮ Смолінський - 2021 - ela.kpi.ua
Анотація Об'єктом дослідження курсової роботи є дослідження особливостей
мікроскопічної кінетики спікання спалву Fe-20%(мас.) Mo. Мета роботи полягає у …
мікроскопічної кінетики спікання спалву Fe-20%(мас.) Mo. Мета роботи полягає у …
Discussion on “Interdiffusion Behaviors and Mechanical Properties of Zn–Cr System” by Zhuang Et Al., Calphad 74 (2021) 102308
S Yadav, VA Baheti - Calphad, 2021 - papers.ssrn.com
Using the Wagner approach, we have re-estimated the reported diffusional kinetic
parameters of the CrZn17 phase in the Cr–Zn system. We have compared it with the data …
parameters of the CrZn17 phase in the Cr–Zn system. We have compared it with the data …