Destruction of metal–organic frameworks: positive and negative aspects of stability and lability
Metal–organic frameworks (MOFs), constructed from organic linkers and inorganic building
blocks, are well-known for their high crystallinity, high surface areas, and high component …
blocks, are well-known for their high crystallinity, high surface areas, and high component …
[HTML][HTML] Emerging CO2 utilization technologies for construction materials: A review
The construction industry is a major contributor of CO 2 emissions. Carbonation, involving
the reaction of CO 2 with alkaline reactants, immobilizes CO 2 into thermodynamically stable …
the reaction of CO 2 with alkaline reactants, immobilizes CO 2 into thermodynamically stable …
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
NA Rashidi, S Yusup - Journal of CO2 utilization, 2016 - Elsevier
The increase of carbon dioxide (CO 2) concentration in the ambient air has become the key
factor in the pace of temperature rise, and accordingly, is a primary contributor towards …
factor in the pace of temperature rise, and accordingly, is a primary contributor towards …
Carbon capture and utilization technology without carbon dioxide purification and pressurization: a review on its necessity and available technologies
Carbon capture and utilization (CCU) has attracted increased attention as a means to
mitigate and adapt to climate change. CCU technology regards CO2 as a raw material and …
mitigate and adapt to climate change. CCU technology regards CO2 as a raw material and …
[HTML][HTML] Zeolites and related sorbents with narrow pores for CO 2 separation from flue gas
Adsorbents with small pores are especially relevant for capturing carbon dioxide at large
emission sources. Such sorbents could be used potentially to reduce the energy demands …
emission sources. Such sorbents could be used potentially to reduce the energy demands …
Postsynthetic Functionalization of Mg-MOF-74 with Tetraethylenepentamine: Structural Characterization and Enhanced CO2 Adsorption
Postsynthetic functionalization of magnesium 2, 5-dihydroxyterephthalate (Mg-MOF-74) with
tetraethylenepentamine (TEPA) resulted in improved CO2 adsorption performance under …
tetraethylenepentamine (TEPA) resulted in improved CO2 adsorption performance under …
CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15
R Sanz, G Calleja, A Arencibia, ES Sanz-Pérez - Applied Surface Science, 2010 - Elsevier
Adsorption of pure CO2 on SBA-15 impregnated with branched polyethyleneimine (PEI) has
been studied. Materials were prepared by impregnating the pore surface of SBA-15 …
been studied. Materials were prepared by impregnating the pore surface of SBA-15 …
Bioflocculation of microalgae and bacteria combined with flue gas to improve sewage treatment
S Van Den Hende, H Vervaeren, S Desmet, N Boon - New biotechnology, 2011 - Elsevier
Although microalgae are promising for a cradle-to-cradle design approach of sewage
treatment, their application is hampered by high harvesting costs and low C: N ratios of …
treatment, their application is hampered by high harvesting costs and low C: N ratios of …
[HTML][HTML] Flue-to-fuel: Bio-integrated carbon capture and utilization of dilute carbon dioxide gas streams to renewable methane
Capturing carbon dioxide (CO 2) from flue gases and utilizing it as a feedstock for the
production of renewable chemicals and fuels has been identified as an essential step …
production of renewable chemicals and fuels has been identified as an essential step …
Valuing metal–organic frameworks for postcombustion carbon capture: a benchmark study for evaluating physical adsorbents
The development of practical solutions for the energy‐efficient capture of carbon dioxide is
of prime importance and continues to attract intensive research interest. Conceivably, the …
of prime importance and continues to attract intensive research interest. Conceivably, the …