Accurate measurement and prediction of laminar burning velocity is important for
characterization of premixed combustion properties of a fuel, development and validation of …

The fundamental combustion and emissions properties of advanced biofuels are reviewed,
and their impact on engine performance is discussed, in order to guide the selection of …

Jet turbine fuels have not been completely replaced by biomass-derived fuels due, in part, to
the lack of the aromatic and cycloalkane hydrocarbons in bio-jet fuels. Such molecules play …

Improvement of gasoline combustion efficiency and its emission reduction are the hot theses
of the gasoline components and its surrogate fuels. In this paper, the mechanism and …

Conventional transportation fuels used in aviation (jet fuel) or in ground transportation
(gasoline, diesel) contain multitude of hydrocarbon components and are difficult to be …

This paper presents an experimental and modeling study of the oxidation of toluene, ortho-
xylene, meta-xylene, and para-xylene in a jet-stirred reactor. In order to facilitate …

A new surrogate fuel was developed to emulate both the physical and chemical properties of
RP-3 kerosene. Six property targets were chosen for the new surrogate fuel formulation …

The low-temperature oxidation (under the conditions of the initial pressure of 0.1 MPa,
equivalence ratio of 0.5 and 1.0, temperature range of 550–1100 K), ignition delay times …

The laminar flame propagation of benzene, toluene and ethylbenzene was investigated at T
u= 423 K, P u= 1–20 atm and various equivalence ratios in a high-pressure constant-volume …

The present work investigated the laminar flame speed measurement of kerosene-relevant
fuel, including Jet A-1 commercial kerosene, and surrogate kerosene fuel and its pure …