RC walls in Australia: Seismic design and detailing to AS 1170.4 and AS 3600
SJ Menegon, JL Wilson, NTK Lam… - Australian Journal of …, 2018 - Taylor & Francis
This paper reviews the current seismic design procedures for reinforced concrete buildings
in Australia, with direct reference to the Australian earthquake loading code, AS 1170.4 and …
in Australia, with direct reference to the Australian earthquake loading code, AS 1170.4 and …
Cyclic tensile-compressive tests on thin concrete boundary elements with a single layer of reinforcement prone to out-of-plane instability
The growing need for residential housing in Latin American countries has led to the
construction of reinforced concrete buildings with wall thicknesses as low as 8–10 cm. Such …
construction of reinforced concrete buildings with wall thicknesses as low as 8–10 cm. Such …
[HTML][HTML] Response of RC shear walls with single and double layers of reinforcements subjected to in-plane cyclic loading
Reinforced concrete (RC) shear walls are primarily designed to resist lateral actions in
buildings, in addition to carrying the vertical loads from above. Recent changes in the …
buildings, in addition to carrying the vertical loads from above. Recent changes in the …
The effect of longitudinal reinforcement ratio on the lateral buckling behavior of R/C walls modelled using prism elements
T Chrysanidis - Journal of Building Engineering, 2021 - Elsevier
Studies on buildings subjected to earthquake action have shown that failure due to lateral
buckling can cause structures to collapse. Therefore, transverse instability, its …
buckling can cause structures to collapse. Therefore, transverse instability, its …
Out-of-plane response of in-plane-loaded ductile structural walls: State-of-the-art and classification of the observed mechanisms
Following observations of out-of-plane instability in slender ductile structural walls in some
recent earthquakes, this mode of wall failure has been and is being investigated by several …
recent earthquakes, this mode of wall failure has been and is being investigated by several …
Axial response of rectangular RC prisms representing the boundary elements of ductile concrete walls
In this paper, the axial behaviour of boundary elements of rectangular ductile reinforced
concrete (RC) walls is investigated. For this purpose, axial tests on rectangular RC prisms …
concrete (RC) walls is investigated. For this purpose, axial tests on rectangular RC prisms …
Seismic design of lightly reinforced concrete walls
Y Lu - 2017 - researchspace.auckland.ac.nz
During the 2010/2011 Canterbury earthquakes in New Zealand, several lightly reinforced
concrete (RC) walls in multi-storey buildings formed only a limited number of cracks at the …
concrete (RC) walls in multi-storey buildings formed only a limited number of cracks at the …
Design recommendations to prevent global out-of-plane instability of rectangular reinforced concrete ductile walls
Observations of out-of-plane (OOP) instability in the 2010 Chile earthquake and in the 2011
Christchurch earthquake resulted in concerns about the current design provisions of …
Christchurch earthquake resulted in concerns about the current design provisions of …
A parametric study on out-of-plane instability of doubly reinforced structural walls. Part II: Experimental investigation
The effects of different parameters on the evolution of Out-Of-Plane (OOP) instability in
rectangular walls were studied using a validated FEM model. Based on this parametric …
rectangular walls were studied using a validated FEM model. Based on this parametric …
Instability of thin concrete walls with a single layer of reinforcement under cyclic loading: Numerical simulation and improved equivalent boundary element model for …
Thin reinforced concrete walls may fail due to out-of-plane instability when subjected to
seismic loading. While previous numerical studies on wall instability have focused on the …
seismic loading. While previous numerical studies on wall instability have focused on the …