Volumetric emission tomography for combustion processes
This is a comprehensive, critical, and pedagogical review of volumetric emission
tomography for combustion processes. Many flames that are of interest to scientists and …
tomography for combustion processes. Many flames that are of interest to scientists and …
Quantitative measurement of OH* and CH* chemiluminescence in jet diffusion flames
Y Liu, J Tan, M Wan, L Zhang, X Yao - ACS omega, 2020 - ACS Publications
Quantitative measurement of chemiluminescence is a challenging work that limits the
development of combustion diagnostics based on chemiluminescence. Here, we present a …
development of combustion diagnostics based on chemiluminescence. Here, we present a …
The effect of poly (oxymethylene) dimethyl ethers (PODE3) on soot formation in ethylene/PODE3 laminar coflow diffusion flames
This paper investigates the effect of poly (oxymethylene) dimethyl ether (PODE 3) on soot
formation in ethylene/PODE 3 laminar coflow diffusion flames. The flames were fuelled using …
formation in ethylene/PODE 3 laminar coflow diffusion flames. The flames were fuelled using …
Spline-based Abel Transform (SAT) radial property reconstruction for noise and trapping correction: Application to axisymmetric sooting flames
In combustion research, optical diagnostics often necessitate Abel inversion to deconvolve
the measurements of axisymmetric flames, especially to determine local soot temperature …
the measurements of axisymmetric flames, especially to determine local soot temperature …
Structural effects of C3 oxygenated fuels on soot formation in ethylene coflow diffusion flames
This paper investigates how the structure of three C3 oxygenated fuels: dimethyl carbonate
(DMC), dimethoxymethane (DMM) and isopropanol (IPA) influences soot formation when the …
(DMC), dimethoxymethane (DMM) and isopropanol (IPA) influences soot formation when the …
Soot pyrometry by emission measurements at different wavelengths in laminar axisymmetric flames
In this work, a multi-wavelength pyrometry method is proposed in order to evaluate soot
temperature for laminar axisymmetric non-premixed flames. A single radiative model that …
temperature for laminar axisymmetric non-premixed flames. A single radiative model that …
Experimental and numerical study of soot formation in laminar n-butylcyclohexane and n-butylbenzene diffusion flames at elevated pressures
The soot formation characteristics of laminar nitrogen-diluted n-butylcyclohexane and n-
butylbenzene diffusion flames were experimentally and numerically investigated at …
butylbenzene diffusion flames were experimentally and numerically investigated at …
A calibration-free two-dimensional spectral soot emission platform for temperature and soot measurements
M Serwin, AE Karataş - Experimental Thermal and Fluid Science, 2022 - Elsevier
A simple and cost-effective temperature and soot volume fraction measurement technique
that does not rely on spectral or absolute irradiance calibration is developed. The technique …
that does not rely on spectral or absolute irradiance calibration is developed. The technique …
A decomposition method for the simultaneous reconstruction of temperature and soot volume fraction distributions in axisymmetric flames
H Liu, H Zhou, C Xu - Measurement Science and Technology, 2020 - iopscience.iop.org
This paper presents a method for the simultaneous reconstruction of temperature and soot
volume fraction distributions in axisymmetric flames. In the proposed method, the radiation …
volume fraction distributions in axisymmetric flames. In the proposed method, the radiation …
On the consideration of signal trapping for soot sizing by angular light scattering in laminar flames
Soot particles are known to be harmful to health and the environment, and reducing their
production in industrial systems is a crucial task in the pursuit of green energy production …
production in industrial systems is a crucial task in the pursuit of green energy production …