Cermets are a category of materials including ceramic and metallic phases, which possess
the combined properties of both phases. Over the last few decades, numerous conventional …

Cermets are widely used in various industrial applications due to their high hardness,
thermal stability, thermal conductivity, exceptional mechanical properties, and oxidation …

Abstract 316L austenitic stainless steel has a wide range of industrial applications. However,
one of the major drawbacks is its low yield strength (170–300 MPa in annealed state). We …

The hot rolled medium manganese Ti-bearing and Ti-free steels were solution treated at
1000℃ and then aged at 500, 550 and 600℃, respectively. The results showed that Ti …

Abstract 316 L stainless steel is prone to failure under high-strength conditions due to low
strength and poor wear resistance, which limits its further application severely. In this study …

Selective laser melting (SLM) is one of the metal additive manufactured technologies with
the highest forming precision, which prepares metal components through melting powders …

In this paper, the iron matrix composite TiC/Fe was fabricated by an in-situ process called
exothermic dispersive synthesis from a powder blend of pure elements Fe, Ti and C. The …

Abstract The TiC/Fe ceramic metal composite (MMC) with WC particles addition was
successfully produced by laser deposition process. The effect of the WC addition to the Fe …

A design strategy is presented for the development of a laser-deposited Stellite 6 coating
with high ductility and low thermal fatigue crack propagation rate. The strategy involved …

Fe alloy composites reinforced with in-situ titanium carbide (TiC) particles were fabricated by
reactive sintering using different reactant C/Ti ratios of 0.8, 0.9, 1 and 1.1 to investigate the …