The “expanded” phases in the low-temperature treated stainless steels: a review

F Borgioli - Metals, 2022 - mdpi.com
Low-temperature treatments have become a valuable method for improving the surface
hardness of stainless steels, and thus their tribological properties, without impairing their …

Boriding of laser-clad Inconel 718 coatings for enhanced wear resistance

T Lindner, A Günen, G Töberling, S Vogt, MS Karakas… - Applied Sciences, 2021 - mdpi.com
Nickel-based superalloys are particularly suitable for applications under corrosive
conditions. Economic advantages can be achieved by limiting the use of materials to the …

Low-temperature plasma nitriding for austenitic stainless steel layers with various nickel contents fabricated via direct laser metal deposition

S Adachi, M Egawa, T Yamaguchi, N Ueda - Coatings, 2020 - mdpi.com
In this study, low-temperature plasma nitriding is applied to austenitic stainless steels at
temperatures below 450° C. This enhances the wear resistance of the steels with …

The Corrosion and Wear-Corrosion of the Iron-Base Amorphous Coating Prepared by the HVOF Spraying

PH Liao, JW Jian, LW Tsay - Metals, 2023 - mdpi.com
In this work, the corrosion behaviors of an iron-based amorphous coating produced by high-
velocity oxy-fuel (HVOF) spraying were investigated. Potentiodynamic and potentiostatic …

Impact of mechanical processes as a pre-sulphonitriding treatment on tribology properties of selected P/M tool steels

D Toboła - Materials, 2019 - mdpi.com
We have evaluated phase composition changes in the surface layer (SL) and wear
resistance of steels investigated after various mechanical processes such as a pre …

Laser surface alloying of austenitic 316L steel with boron and some metallic elements: Microstructure

M Kulka, D Mikołajczak, N Makuch, P Dziarski… - Materials, 2020 - mdpi.com
Austenitic 316L steel is known for its good oxidation resistance and corrosion behavior.
However, the poor wear protection is its substantial disadvantage. In this study, laser surface …

The corrosion resistance, cytotoxicity, and antibacterial properties of lysozyme coatings on orthodontic composite arch wires

L He, Y Cui, C Zhang - RSC advances, 2020 - pubs.rsc.org
Objective: The corrosion resistance of new orthodontic composite arch wires (CAWs), which
have excellent mechanical properties in a simulated oral environment, must be improved …

Advances in Thermal Spray Technology

S Joshi - Materials, 2020 - mdpi.com
Coatings deposited utilizing different thermal spray variants have been widely used for
diverse industrial applications. Today, various coating techniques belonging to the thermal …

Enhanced Wear Resistance of Gas Nitrided AISI 431 HVOF Coatings at Elevated Temperatures

N Hanisch, E Saborowski, T Lindner, B Preuß… - Journal of Materials …, 2024 - Springer
Stainless-steel feedstocks achieve increasing importance as sustainable and cost-efficient
alternative regarding thermal spraying. However, the wear resistance is often insufficient for …

Laser surface alloying of austenitic 316L steel with boron and some metallic elements: Properties

M Kulka, D Mikołajczak, P Dziarski, D Panfil-Pryka - Materials, 2021 - mdpi.com
Austenitic 316L stainless steel is known for its good resistance to corrosion and oxidation.
However, under conditions of appreciable mechanical wear, this steel had to demonstrate …