Additive manufacturing (AM) is a sustainable and innovative manufacturing technology to
fabricate products with specific properties and complex shapes for additive manufacturable …

Although several research works in the literature have focused on studying the capabilities
of additive manufacturing (AM) systems, few works have addressed the development of …

Building end-use functional parts with additive manufacturing (AM) technologies is a
challenging task. Several factors influence their surface finish, dimensional accuracy …

This paper aims to analyze the fatigue response of PLA parts manufactured through fused
filament fabrication (FFF). The influence of four factors (layer height, fill density, nozzle …

Selective Laser Sintering (SLS) is a laser-based additive manufacturing technique capable
of printing both metallic and non-metallic three-dimensional physical parts rapidly in the …

Digital light processing (DLP) is an accurate additive manufacturing (AM) technology
suitable for producing micro-parts by photopolymerization. As most AM technologies …

Design and manufacturing engineers are not fully aware of the different possibilities that
PolyJet™ technology offers. The goal of this article is to provide the design and …

Research on Laser Powder Bed Fusion (L-PBF) of polymer powder feedstocks has raised
over the last decade due to the increased utilization of the fabricated parts in aerospace …

Additive manufacturing offers flexibility in designing, customizing, minimization of waste,
manufacturing complex profiles and faster prototyping. Among these, polyjet and fused …

Filament-based material extrusion additive manufacturing (MEAM) is one of the most
commonly used techniques in additive manufacturing (AM). In spite of recent notable …