A review on fly ash utilization

M Mathapati, K Amate, CD Prasad… - Materials Today …, 2022 - Elsevier
The coal-fired power plant produces a by-product called as fly ash. Large quantity of fly ash
is generated throughout the world and storage as well as disposal of this menace is a …

Structure–Property Correlation of Plasma-Sprayed Inconel625-Al2O3 Bimodal Composite Coatings for High-Temperature Oxidation Protection

G Prashar, H Vasudev - Journal of Thermal Spray Technology, 2022 - Springer
High-temperature oxidation in coal-fired power stations is a major challenge. Thermal
spraying is a prospective surface modification method to deposit protective coatings to …

Advances in corrosion-resistant thermal spray coatings for renewable energy power plants. Part I: Effect of composition and microstructure

E Sadeghi, N Markocsan, S Joshi - Journal of Thermal Spray Technology, 2019 - Springer
Power generation from renewable resources has attracted increasing attention in recent
years owing to the global implementation of clean energy policies. However, such power …

Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2− 25NiCr coatings

N Vashishtha, RK Khatirkar, SG Sapate - Tribology international, 2017 - Elsevier
In the present work erosive and abrasive wear behaviour of HVOF deposited WC-12Co, WC–
10Co–4Cr and Cr 3 C 2− 25NiCr coatings was investigated. The maximum wear rate was …

High-temperature oxidation and erosion resistance of Ni-based thermally-sprayed coatings used in power generation machinery: a review

G Prashar, H Vasudev, L Thakur - Surface review and letters, 2022 - World Scientific
The life of the components operating under various high-temperature environments
decreases due to the activation of different failure mechanisms. High-temperature oxidation …

Comparative Study on the Cavitation Erosion and Sliding Wear of Cold-Sprayed Al/Al2O3 and Cu/Al2O3 Coatings, and Stainless Steel, Aluminium Alloy, Copper …

M Szala, L Łatka, M Walczak, M Winnicki - Metals, 2020 - mdpi.com
The paper investigates the cavitation erosion (CE) and sliding wear (SW) resistance of cold-
sprayed Al/Al2O3 and Cu/Al2O3 composites and studies them in relation to a set of metallic …

High-temperature oxidation behavior of direct-aged bimodal Al2O3-reinforced Inconel625 plasma sprayed composite coatings

G Prashar, H Vasudev - Surface and Coatings Technology, 2023 - Elsevier
Plasma-sprayed (PS) coatings in industrial or aerospace applications are chosen as a
technique for enhancing the high-temperature oxidation performance of parts operating …

High temperature wear performance of HVOF-sprayed Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr hardmetal coatings

W Zhou, K Zhou, Y Li, C Deng, K Zeng - Applied Surface Science, 2017 - Elsevier
Abstract A novel Cr 3 C 2-WC-NiCoCrMo and commercial Cr 3 C 2-NiCr thermal spray-
grade powders with particle size of− 45+ 15 μm were prepared by an agglomeration and …

A review on the wear, corrosion and high-temperature resistant properties of wire arc-sprayed Fe-based coatings

JN Ndumia, M Kang, BV Gbenontin, J Lin… - Nanomaterials, 2021 - mdpi.com
Among different thermal spraying methods, arc-spraying has been widely used due to its low
operating costs and high deposition efficiency. The rapid progress of cored wire technology …

Advances in fault detection and diagnosis for thermal power plants: A review of intelligent techniques

S Khalid, J Song, I Raouf, HS Kim - Mathematics, 2023 - mdpi.com
Thermal power plants (TPPs) are critical to supplying energy to society, and ensuring their
safe and efficient operation is a top priority. To minimize maintenance shutdowns and costs …