Laser-induced periodic surface structures (LIPSS) formation on the surface of mono-
crystalline silicon is reported for a specific fabrication regime of large-area structuring. Using …

Abstract An additively produced AlSi10Mg aluminium alloy was post-processed by Equal
Channel Angular pressing at 150 ºC. This resulted in a fabrication of the novel …

Irradiation of solids with ultrashort pulses using laser sources in the mid-infrared (mid-IR)
spectral region is a yet predominantly unexplored field that opens broad possibilities for …

The creation of fluorescent defects in silicon is a key stepping stone toward assuring the
integration perspectives of quantum photonic devices into existing technologies. Here, we …

Laser-based amorphization on the back surface of a 525-μm thick crystalline silicon sample
is studied. To deposit sufficient energy for a local change from a crystalline to an amorphous …

We report on a powerful mid-IR diode-side-pumped tunable Er: LiYF_4 (Er: YLF) laser
electro-optically Q-switched with the help of a KTiOPO_4 crystal. At a 20 Hz repetition rate …

Monitoring the laser-induced melting and solidification dynamics of Ge upon laser irradiation
is an enormous challenge due to the short penetration depth of its liquid phase. In this work …

The laser interference patterning of a silicon surface via UV femtosecond pulse irradiation,
resulting in 350 nm periodic structures, is demonstrated. The structuring process was …

Using lasers to achieve controlled crystallographic phase changes in silicon with high
spatial precision promises new manufacturing solutions in semiconductor technologies …

Laser-assisted nanostructuring of silicon interfaces provides a unique procedure for leading-
edge technologies. We report on a new embossing technique with tightly focused Gaussian …