Sawing is the most common machining process and is present in both primary and
secondary wood transformation sectors. The objective of this paper is to review how it is …

The effects of densification temperature, planing, circular sawing, and sanding on the
surface roughness of densified Scots pine using the open-system thermodynamic method …

Tremendous efforts have been exerted to develop effective and ecofriendly materials for
separation of oil/water mixtures and emulsions. However, porous materials with …

The effects of milling process parameters on cutting forces and surface roughness were
studied during peripheral up milling of bamboo scrimber. The study results indicated that the …

A test method was developed to evaluate the surface characteristics of veneers produced
using the peeling process. Rotary cut Scots pine (Pinus sylvestris L.) veneers, which were …

Volumes of timber logs (dead trees) in the Volta Lake in Ghana, that had become a dead
trap for water transportation, were being extracted for utilization to increase the timber …

Bu çalışmada, ağaç malzeme yüzey pürüzlülüğünün vernik katmanı tutunma (adezyon)
direncine etkisinin belirlenmesi amaçlanmıştır. Bu amaç doğrultusunda, Doğu kayını (Fagus …

Extracellular polymeric substances (EPS) are one of the main components of biofilm,
prompting biofilm to form a cohesive three-dimensional framework. Numerous methods are …

در این تحقیق، اثر چوب کششی بر زبری چوب صنوبر در دو مقطع شعاعی و مماسی و نیز امکان کاهش
زبری آن با روش بخار گرمایی در دمای 120 درجه سانتی‌گراد به مدت 30 و 60 دقیقه موردبررسی قرار …‎