High-temperature wear-resistant aluminum alloy matrix composites are of prime importance
for the advancement of industries such as aerospace and automobile. For this objective, the …

The microstructure of Al–Si alloys of hyper-(Al80Si20) hypo-(Al93Si7) and eutectic (Al87.
8Si12. 2) compositions have been investigated by Small Angle Neutron Scattering (SANS) …

Hypereutectic Al–20Si (Si 20wt.%, Al balance) alloy surface was treated with high current
pulsed electron beam (HCPEB) under different pulse numbers. The results indicate that …

Tribological behavior of the Al-20Si-5Fe-2Ni alloy and its composite containing 30 wt%
copper-coated graphite were investigated at 25–500° C. The result indicated that the …

The aim of this work is to study the effect of cooling rate and subsequent hot consolidation
on the microstructural features and mechanical strength of Al–20Si–5Fe–2X (X= Cu, Ni and …

Traditional metallic glasses (MGs), based on one or two principal elements, are notoriously
known for their lack of tensile ductility at room temperature. Here, we developed a …

Microstructural, physical and mechanical properties of Al–20 wt% Si matrix alloy powders
and those reinforced with TiB 2 and their sintered composites were investigated in relation to …

The mechanical properties of iron-rich Al–Si alloy is limited by the existence of plenty of the
iron-rich phase (β-Al5FeSi), whose unfavorable morphology not only splits the matrix but …

A series of Alsingle bond 7Si based alloys with trace addition of Sr, Ce or P were prepared
using melt-spinning at two different high cooling rates, and the microstructure as well as the …

A comprehensive study on the formation mechanism of supersonic atmospheric plasma
sprayed hypereutectic Al-25 wt% Si coating was performed by investigating microstructural …