Heat treatments have a significant effect on the properties of CuCrZr alloy. However, the
mechanism of how heat treatments affect the microstructure and properties of CuCrZr alloy …

The present study aims to determine the set of optimum process parameters in order to
minimize spiking during bead-on-plate welding of ETP copper plates using electron beam …

Realising high-quality welding of the peak aged Cu–Cr–Zr alloy has always been a big
challenge. Under a low rotation rate of 400 rev min− 1, equiaxed ultrafine grains together …

The welding processing between large-dimension components is a big challenge for
manufacturing in modern industry. In this work, a friction stir welding technology was …

Studies related to butt welding of precipitation hardened (PH) Cu-Cr-Zr alloy plates using
electron beam were carried out. Significant reductions in strength and microhardness were …

In this article, the copper-chromium-zirconium (CuCrZr) alloys plates with 21 mm in
thickness were butt joined together by means of FSW (friction stir welding). The properties of …

In the present study, the effect of post-weld heat treatment (PWHT) on the microstructure and
mechanical properties of the friction stir welded Cu–Cr–Zr–Ti alloy was studied with the aid …

It is shown that when surfacing large backup rolls of hot rolling mills made of 90CrV steel,
the limited weldability of steel leads to the need to select the thermal mode of surfacing that …

Вивчення реальних умов експлуатації фурми для кисневого дуття показує, що в її
головній частині, яка знаходиться поблизу реакційних зон конвертора, виникають …

The study of real operating conditions of the lance for oxygen blasting shows that in its head
part, located near reaction zones of the converter, high thermal stresses arise caused by …