Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance
M Mehdikhani, L Gorbatikh… - Journal of …, 2019 - journals.sagepub.com
Voids, the most studied type of manufacturing defects, form very often in processing of fiber-
reinforced composites. Due to their considerable influence on physical and …
reinforced composites. Due to their considerable influence on physical and …
[HTML][HTML] X-ray computed tomography of polymer composites
The use of X-ray computed tomography (CT), exploiting both synchrotron and laboratory
sources, has grown significantly over the last decade, driven primarily by improvements in …
sources, has grown significantly over the last decade, driven primarily by improvements in …
[HTML][HTML] The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
Optimization of process parameters of major aerospace composites manufacturing
techniques is essential for manufacturing high-quality aerospace components. However …
techniques is essential for manufacturing high-quality aerospace components. However …
[图书][B] Microcomputed tomography: methodology and applications
SR Stock - 2019 - taylorfrancis.com
MicroComputed Tomography has become the gold standard for studying 3D microscopic
structures nondestructively, and this book provides up-to-date coverage of the modality. The …
structures nondestructively, and this book provides up-to-date coverage of the modality. The …
[HTML][HTML] X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading
KT Tan, N Watanabe, Y Iwahori - Composites Part B: Engineering, 2011 - Elsevier
In this study, X-ray radiography and X-ray micro-computed tomography (μCT) are employed
to characterise impact damage in stitched composites, paying particular attention to the …
to characterise impact damage in stitched composites, paying particular attention to the …
Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy
A high-resolution X-ray microscope was used to quantitate the internal morphological
characteristics of 3D-printed, basalt-fiber-reinforced PLA composites. 3D-printed composites …
characteristics of 3D-printed, basalt-fiber-reinforced PLA composites. 3D-printed composites …
[HTML][HTML] Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling
Engineering textiles are used as fibrous reinforcements in high performance polymer
composites. The mechanical properties of composite materials depend on their dual-scale …
composites. The mechanical properties of composite materials depend on their dual-scale …
Data-driven multiscale simulation of FRP based on material twins
In this paper, we propose a multiscale data-driven framework for Fiber Reinforced Polymer
(FRP) composites. At the mesoscopic scale, the 3D stress–strain material database is …
(FRP) composites. At the mesoscopic scale, the 3D stress–strain material database is …
Measuring the impregnation of an out-of-autoclave prepreg by micro-CT
Resin flow into dry reinforcement regions is the main microstructural change during the
processing of out-of-autoclave prepregs and influences air evacuation and void …
processing of out-of-autoclave prepregs and influences air evacuation and void …
[HTML][HTML] Mesoscopic modeling approach and application for steel fiber reinforced concrete under dynamic loading: a review
Steel fiber reinforced concrete (SFRC) has drawn extensive attention in recent years for its
superior mechanical response to dynamic and impact loadings. Based on the existing test …
superior mechanical response to dynamic and impact loadings. Based on the existing test …