Lightweight and sustainable materials for aerospace applications
SB Nagaraju, HC Priya, YGT Girijappa… - Lightweight and …, 2023 - Elsevier
The development and the use of advanced lightweight materials and related technological
progress in the growth of the aerospace industry and the enhancement of aircraft …
progress in the growth of the aerospace industry and the enhancement of aircraft …
Friction stir spot welding of different thickness sheets of aluminum alloy aa6082-T6
Friction stir spot welding (FSSW) is one of the important variants of the friction stir welding
(FSW) process. FSSW has been developed mainly for automotive applications where the …
(FSW) process. FSSW has been developed mainly for automotive applications where the …
Effect of friction stir welding parameters on microstructure-based defect formation and mechanical properties of Tailor Welded Blanks
This maiden work on friction stir welding (FSW) of unequal thickness dissimilar (UETD)
materials with plate thickness ratio (PTR) of 2.54 presents a comprehensive analysis of the …
materials with plate thickness ratio (PTR) of 2.54 presents a comprehensive analysis of the …
A comparative study on friction stir welding of tailor weld blanks
The effect of single-pass (SP) and double-pass (DP) friction stir welding (FSW) on
metallographic and mechanical properties of joints was investigated in this study. Uniform …
metallographic and mechanical properties of joints was investigated in this study. Uniform …
[HTML][HTML] High strength welds in titanium & nickel based alloys by impact welding–A practical method
Joining titanium-based alloys to nickel-based superalloys is of great interest for applications
in aerospace propulsion. Direct welding of these materials using conventional welding …
in aerospace propulsion. Direct welding of these materials using conventional welding …
Al alloy tailor welded blank fabrication by friction stir welding: effect of double-pass
Friction stir welding (FSW) in butt joint configuration between 6.35 mm thick plates of
AA2024-T3 and 2.5 mm thick plates of AA7475-T7 dissimilar alloys is addressed using T4 …
AA2024-T3 and 2.5 mm thick plates of AA7475-T7 dissimilar alloys is addressed using T4 …
Experimental Analysis of Tensile Strength of Different Thicknesses and Dissimilar Aluminum Alloys in Friction Stir Welding
Recently, demands of the prefabricated tailor-welded blanks (TWBs) are being increased in
the manufacturing of the structures of the aircraft panels. TWBs eliminate several operations …
the manufacturing of the structures of the aircraft panels. TWBs eliminate several operations …
Effect of strain rate on tensile behavior of tailor welded blanks
A Amini, AA Nia - … of the Institution of Mechanical Engineers …, 2024 - journals.sagepub.com
The demand for weight reduction, cost savings, more fuel efficiency, and reduced
greenhouse gas has led to the increasing application of tailor welded blanks (TWBs) in the …
greenhouse gas has led to the increasing application of tailor welded blanks (TWBs) in the …
Al alloy tailor-welded blanks fabrication via friction stir welding: effect of shoulder size
Material flow and heat generation by tool shoulder during Friction Stir Welding (FSW)
significantly alters the microstructural and thermomechanical behavior of joints. The effect of …
significantly alters the microstructural and thermomechanical behavior of joints. The effect of …
Investigating nanoindentation creep behavior of pulsed-tig welded inconel 718 and commercially pure titanium using a vanadium interlayer
In a dissimilar welded joint between Ni base alloys and titanium, creep failure is a potential
concern as it could threaten to undermine the integrity of the joint. In this research, the …
concern as it could threaten to undermine the integrity of the joint. In this research, the …