Dispersants are chemical moieties that modify interfacial characteristics by adsorption at the
solid–liquid interface, and they have been widely used in modern industrial production. This …

Particle aggregates induced by nanobubble (NB) bridging has been recognized as one of
the main contributors to improve the flotation performance of minerals in NBs-associated …

Coal water slurry (CWS) is the clean and efficient liquid coal-based fuel. CWS with the high
solid content, low viscosity and good fluidity is conducive to efficient gasification and …

The anionic dispersants, ie, sodium lignosulfonate (SLF), naphthalene sulfonate
formaldehyde (NSF) and sodium polystyrene sulfonate (PSS), were commonly used to …

Hydraulic transportation of lignite and high ash coal (HAC) is economically unviable due to
their poor slurryability and stability. The study suggests and shows how the proper selection …

Dispersants can have a substantial impact on the rheological characteristics of coal–water
slurry (CWS). Due to their advantages in cost and synthesis, linear dispersants are currently …

In this paper, coal-plastic-water slurry (CPWS) was prepared by blending plastic waste with
coal in water. To enhance the grindability and density, the plastic waste containing …

Coal-semicoke-water slurry (CSWS) was prepared by blending semicoke with coal-water
slury (CWS). The effects of semicoke blending ratio and particle size distribution on the …

Coal water slurry (CWS) fuel prepared using microfine coal particles with a size distribution
of 1–10 μm is a promising way to cleanly utilize solid resources in engines, even catering a …

Coal water paste (CWP) is a mixture of pulverized coal and water with a mass concentration
of more than 70 wt%. CWP has a higher coal concentration than traditional coal water slurry …