Microstructure features directly reflect mechanical responses during material deformation
and can influence the surface integrity of machined components, which is of great interest to …

Titanium and nickel alloys have been used widely due to their admirable physical and
mechanical properties, which also result in poor machinability for these alloys. Improvement …

The creep response of a Ti‐6Al‐4V alloy produced by additive manufacturing was
investigated at 500, 600, and 650° C using constant load experiments. A collection of recent …

The mechanical and physical properties of component surfaces are determined by the
evolution of microstructures during high speed machining (HSM). In order to investigete the …

The mechanical properties of Ti-6Al-4V alloy are sensitive to strain rate and temperature
load. The finite element simulation results of high-speed machining Ti-6Al-4V alloy depend …

The phase transformation of face-centered cubic (fcc) titanium (Ti), transformed from
hexagonal close-packed (hcp) Ti, in Ti-6Al-4V alloy subjected to ultrasonic surface rolling …

Commercially pure (CP-Ti) and alloyed titanium such as, Ti6Al4V and Ti45Nb have versatile
use from aerospace to biomedical applications due to the low density, high specific strength …

Abstract Ti-6Al-4V underwent higher temperature, larger strain, and higher strain rate during
machining, thereby microstructure and relative mechanical properties changed accordingly …

In this paper, plasma activated sintering was used to prepare powder metallurgy TC4
titanium alloys, and the effects of the sintering process on the densification, microstructure …

Uniaxial tension experiments and electron backscatter diffraction were performed on a
bimodal Ti-6Al-4V alloy to study in situ the deformation behavior of primary hcp-Ti (α p). It …