In the past decade, aluminum alloys have become important structural materials in the
automotive industry, thanks to their low density, high strength, high fracture toughness, and …

The tensile test is widely used for identifying the material plastic flow curve: this is a
fundamental step in the design and in material behavior analysis. However, during these …

The aim of this work was to investigate the effect of hot deformation on the aging behavior of
precipitation-hardenable aluminum alloy AA7075 within a novel thermo-mechanical forming …

The tailored tool tempering press hardening process (TTTPH), where the cooling rate is
controlled by dividing the tools into heated and cooled zones, allows the manufacture of …

An investigation on the thermal property, fracture mechanism of substrate and coating layer,
liquid‐metal embrittlement (LME) crack, coating layer morphology, microstructure, and …

Herein, functionally graded AA7075 components manufactured via hot stamping are
investigated by focusing on the effect of different process variables on localized …

In this study, the Gleeble tests and hot stamping of practical part of Zn-coated hot stamping
steel were conducted. Based on the analysis of thermal properties, a material model was …

The microstructure evolution and mechanical properties of a Fe–0.12 C–0.2 Si–1.6 Mn–0.3
Cr–0.0025 B (wt.%) steel with different initial microstructures, ie, hot rolled (HR) and cold …

Herein, the effect of heat treatment with die quenching on Zn‐coated hot stamping steel is
analyzed. Heating temperatures are 850, 880, 900, and 930° C, and soaking times are 4 …

Herein, the effect of process parameters on the formability of Zn‐coated stamping steel is
analyzed, including heating temperature, soaking time, forming temperature, deformation …