The best way to reduce the degradation of metallic cultural heritage is through preventive
conservation measures but, in many cases, it is not possible to obtain adequate …

The electrochemical behavior and susceptibility to pitting corrosion of CrFeCoNi and
CrMnFeCoNi high entropy alloys were studied in a 0.1 M NaCl solution at temperatures …

Corrosion of TWIP austenitic steels Fe-Mn-3Al-3Si was studied using polarization curves,
EIS tests and XPS. Results indicated that increased concentrations of Mn were detrimental …

Cerium-based conversion coatings were deposited on aluminium alloy 6061-T6 by
immersion in two cerium salt sources (chloride-and nitrate-based) assisted with hydrogen …

Twinning-induced plasticity (TWIP) steels have higher strength and ductility than
conventional steels. Deformation mechanisms producing twins that prevent gliding and …

The effect of Na+ and Ca 2+ cations on the chemical activity of NO 2–/NO 3–corrosion
inhibitors on carbon steel rebars were studied in 0.6 M Cl–simulated concrete pore solution …

This paper is a contribution to correlate benzotriazole (BTA) adsorption films on copper with
BTA concentration in bulk solution with hydrochloric (HCl) acid. Three HCl concentrations …

Steel bars embedded in an alkali-activated slag (AAS) concrete were exposed (after curing
for 28days) to an accelerated carbonation test (3% CO2, 65% relative humidity (RH), and …

Abstract The influence of temperature (25, 75, and 150° C) on the passivation behavior of
Modified Martensitic 13Cr Stainless Steel (M13Cr) in CO 2 saturated acidic salt brine …

Recently, increasing efforts have been made to study the tribocorrosion mechanism and
influencing factors, and yet little relevant to the influence of electrolyte characteristics. In this …