A nanocomposite of (ZrO 2-Al 2 O 3)/GO was successfully synthesized by a simple
sonochemical method in this study. A special 3D network was formed in (ZrO 2-Al 2 O 3)/GO …

Coke wastewater is one of the most problematic industrial wastewaters, due to its large
volume and complex pollutant load. In this study, ion exchange technology was investigated …

Strontium (Sr) is a valuable metal found in abundance in seawater. However, its recovery
from seawater has received little attention despite its many industrial applications. Batch and …

A magnesia-pullulan composite (MgOP) was previously shown to effectively remove fluoride
from water. In the present study, a continuous fixed-bed column was used to examine the …

This paper reports the application of four neural network surrogate models for the correlation
and prediction of asymmetric breakthrough curves obtained from the multi-component …

Abstract 3D printed microchannels were loaded with α-Fe 2 O 3 nanoparticles for fluoride
removal from water. Devices having 35 microchannels of 2 and 1.5 mm diameter were …

The feasibility of fluoride adsorption from aqueous solutions using naturally available
bentonite clay in both modified and unmodified forms is investigated in this report. Scanning …

A simple chemical route was adopted for the preparation of adsorbent to remove fluoride in
the simulation solution. In this study, commercially activated carbon (CAC) was used as the …

abstract Fluoride anion (F–) is considered as micronutrient. It is essential for the
maintenance of bone skeleton and prevent dental decay. The excess amounts present in …

Luffa sponge (fibrous network obtained from mature dried Luffa cylindrica) was activated
using particulate materials to increase its adsorption capacity for fluoride ions from aqueous …