Sonoelectrochemical degradation of ciprofloxacin in water on a Ti/BaTiO3 electrode
We report the sonoelectrochemical degradation of ciprofloxacin in water using BaTiO 3
supported on a titanium sheet electrode (Ti/BaTiO 3). BaTiO 3 nanoparticle was synthesized …
supported on a titanium sheet electrode (Ti/BaTiO 3). BaTiO 3 nanoparticle was synthesized …
[HTML][HTML] The effect of annealing temperature on microstructure and energy band gap of 0.2 BaTiO3–0.8 BaZr0. 5Ti0. 5O3 nano material
R Dewi, TS Luqman, SN Sitorus, O Vitayaya… - Materials Today …, 2023 - Elsevier
Abstract The dielectric material 0.2 BaTiO 3–0.8 BaZr 0.5 Ti 0.5 O 3 (BT-BZT) nanostructure
was synthesized through the application of the sol-gel method on the FTO substrate. This …
was synthesized through the application of the sol-gel method on the FTO substrate. This …
The effect of photoconductive mole fraction based on thin film BaxSr1-xTiO3 (X= 0.000; 0.125; 0.250; 0.375; 0.500) on electrical properties and diffusivity coefficient
VR Irzaman, EK Palupi, N Patonah… - Biointerface …, 2021 - repository.unair.ac.id
Barium Strontium Titanate (BaxSr1-xTiO3) thin films have been fabricated for mole fraction
(x= 0.000; 0.125; 0.250; 0.375; 0.500) on p-type silicon (100) substrate using Chemical …
(x= 0.000; 0.125; 0.250; 0.375; 0.500) on p-type silicon (100) substrate using Chemical …
Impacts of low sintering temperature on microstructure, atomic bonds, and dielectric constant of barium titanate (BaTiO3) prepared by co-precipitation technique
Abstract Barium Titanate (BaTiO 3 or BT) is one of which the most attractive ferroelectric
materials that have been widely studied. The fabrication process affects the properties of …
materials that have been widely studied. The fabrication process affects the properties of …
Enhancement of microstructure characteristic and dielectric constant of BaMn0. 05Ti0. 95O3 ceramics
Abstract Barium Titanate or BaTiO3, a ferroelectric material with good dielectric properties, is
widely studied. The performance of BT is influenced by synthesis and doping. Here, Barium …
widely studied. The performance of BT is influenced by synthesis and doping. Here, Barium …
The addition of bismuth (Bi) to the barium titanate (BaTiO3) prepared by chemical solution deposition
RP Rini, F Nurosyid, Y Iriani… - Journal of Physics …, 2021 - iopscience.iop.org
The manufacture of BaTiO 3 thin films and Ba 1-x Bi x TiO 3 have been conducted
successfully on the quartz substrate using Chemical Solution Deposition method. The …
successfully on the quartz substrate using Chemical Solution Deposition method. The …
Influences of bismuth dopant on structural, morphological, and optical properties of barium titanate thin film
This study aimed to fabricate BT and Bi-doped BT with Bi concentration was varied at 0, 5%,
10%, and 15%. The XRD results revealed that more Bi content caused lattice parameter …
10%, and 15%. The XRD results revealed that more Bi content caused lattice parameter …
Effect of Rotational Speed on Microstructure and Optical Properties of Bismuth Ferrite Oxide (BiFeO3)
BiFeO 3 films were deposited on quartz substrate using chemical solution deposition (CSD)
and spin coating techniques with variations of rotational speed (1000 rpm, 2000 rpm, and …
and spin coating techniques with variations of rotational speed (1000 rpm, 2000 rpm, and …
[PDF][PDF] The Effect of Photoconductive Mole Fraction Based on Thin Film BaxSr1-xTiO3 (x= 0.000; 0.125; 0.250; 0.375; 0.500) on Electrical Properties and Diffusivity …
Barium Strontium Titanate (BaxSr1-xTiO3) thin films have been fabricated for mole fraction
(x= 0.000; 0.125; 0.250; 0.375; 0.500) on p-type silicon (100) substrate using Chemical …
(x= 0.000; 0.125; 0.250; 0.375; 0.500) on p-type silicon (100) substrate using Chemical …