The quick rise of intelligent technologies promotes the development of the construction
industry into a new phase. As an advanced cement-based materials, ultra-high performance …

A comprehensive review of the statistical experimental optimization problem concerning the
mixture design of various cement-based materials is presented herein. This review …

Concrete is the most consumed material in the construction industry, and using recycled
concrete aggregates (RCA), silica fume (SF) and ground-granulated blast-furnace slag …

Abstract Supplementary Cementitious Materials (SCMs) have been utilised for decades to
lower the OPC concrete's alkalinity. However, the usage of SCMs to lower the alkalinity of …

Rapid increase in waste generation is one of the biggest environmental problems in the
construction industry. Special attention has been given to using industrial wastes such as …

Compared to conventional concrete self-consolidating concrete (SCC) has a higher cost due
to the large content of cement, use of mineral fillers, and use of various chemical admixtures …

This study presents a statistical design method in developing magnesium phosphate cement
(MPC)-based material for rapid-repair. Specifically, an optimization model considering the …

Stir casting is a common metallurgical route in the casting of aluminum composites. Series of
work done in this aspect considered the development of the composites with fixed stir …

Although the synthesis and properties of natural pozzolan (NP)-based alkali-activated
binder (AAB) have been investigated, to the best of our knowledge, no study has focused on …

The impacts of rheological properties of cementitious grouts on the quality of curtain and
consolidation grouting cannot be ignored. A series of experiments are carried out to …