The viscosity of molten metals is a critical parameter influencing melt fluidity, alloy forming
quality, and casting performance. It is therefore essential to maintain melt viscosity within an …

Abstract In this study, Cu-Ti-Zr and Cu-Ti-Zr-Mg alloys were subjected to solid annealing and
aging under different conditions following 80% cold rolling, in order to investigate the impact …

Abstract Cu–Cr–Ti alloy was successfully prepared by vacuum melting, solution treatment at
960° C for 1 h, 80% cold rolling and aging at 500° C for 1 h. The effect of Ti content on the …

Laser powder bed fusion (LPBF) is a promising method for manufacturing functional and
structural integrated Cu-Cr-Zr components. However, the LPBF-processed Cu-Cr-Zr alloys …

Abstract The Cu-Cr-Nb alloy's high-temperature property is well known for the heat-sink
application in rocket engine combustion chambers. Effects of Ti, Si, and Co microalloying …

The 9R phase is rarely formed in copper alloys because of its high stacking fault energy. In
this study, we generated a large amount of 9R phase in Cu-0.3 Zr-0.15 Cr alloys by dynamic …

Abstract Cu-1Cr-0.1 Zr and Cu-1Cr-0.1 Zr-0.07 La alloy sheets were prepared by the
following process: vacuum casting–homogenization treatment–hot forging–solid solution …

In this study, a novel Cu-0.3 Sn-0.2 Zr (wt.%) alloy was designed to investigate the influence
of Zr addition on the microstructure and properties of the Cu-0.3 Sn alloys. We have …

ABSTRACT Titanium-magnesium (Ti–Mg) alloy is a widely accepted bimetallic material
suitable for biomedical applications. However, reduced wear and corrosion resistance, low …

Trace Si additions contribute to improve the mechanical properties of Cu-Cr-Mg alloys. The
effect of different Si contents (0, 0.06, and 0.16 wt%) on the microstructure, mechanical, and …