The primary focus of this paper is to investigate the application of ANSYS Workbench 19.2
software's advanced feature, known as Separating Morphing and Adaptive Remeshing …

Quasi-brittle materials like rocks may present mechanical non-linearity during cylic loading
due to the formation of fracture process zone (FPZ), which poses a challenging task for …

Static fracture testing was performed on ISRM-suggested semi-circular bend (SCB)
specimens with a constant CMOD increment rate of 0.0002 mm· s− 1, and the digital image …

This study determines the equivalent stress intensity factor (SIF) model that best fits the
experimental behavior of low-carbon steel under mixed modes (I and II). The study assessed …

The study presents the crack mouth opening and propagation of cracks in a composite
material printed by material extrusion subjected to monotonic loading. The composite …

Crack path models were evaluated with experimentally obtained SIF for proportional and
non-proportional loading for plane and tubular ductile steel samples. For non-proportional …

The monitoring and maintenance of cracked structures are generally carried out using
structural integrity assessments. The plastic zone (PZ) crack path (CP) criteria state that a …

Fatigue is a major cause of failure in several industries, and in many practical cases, local
mixed-mode conditions prevail at the crack front. The effect of plane mode mixity on the …

Hoy en día, la medición experimental de esfuerzos se hace por medio de técnicas que
entregan campos completos de deformación o de la diagonal principal de una matriz de …

The present paper shows a way to identify crack tip location (CTL) using edge detection
algorithms. Arbitrary crack tip coordinates were fed to Linear Elastic Facture mechanics …