6TiSCH–IPv6 enabled open stack IoT network formation: A review
The IPv6 over IEEE 802.15. 4e TSCH mode (6TiSCH) network is intended to provide reliable
and delay bounded communication in multi-hop and scalable Industrial Internet of Things …
and delay bounded communication in multi-hop and scalable Industrial Internet of Things …
Mobility-aware energy-efficient parent selection algorithm for low power and lossy networks
S Murali, A Jamalipour - IEEE Internet of Things Journal, 2018 - ieeexplore.ieee.org
IPv6 routing protocol for low-power and lossy networks (RPL) is a standardized routing
protocol for the energy-constrained networks in the Internet of Things networks. Nowadays …
protocol for the energy-constrained networks in the Internet of Things networks. Nowadays …
A novel approach for RPL assessment based on the objective function and trickle optimizations
The ROLL working group proposed the RPL (IPv6 routing protocol for low‐power and lossy
networks) to respond to the requirements of low‐power and lossy networks (LLNs). In this …
networks) to respond to the requirements of low‐power and lossy networks (LLNs). In this …
Adaptive Trickle Timer for Efficient 6TiSCH Network Formation Using Q-Learning
DZ Fawwaz, SH Chung - IEEE Access, 2023 - ieeexplore.ieee.org
The 6TiSCH (IPv6 over IEEE802. 15.4 e time-slotted channel hopping mode) wireless
sensor network architecture utilizes control packets to construct network formation. These …
sensor network architecture utilizes control packets to construct network formation. These …
Enhanced Rank Attack Detection Algorithm (E-RAD) for securing RPL-based IoT networks by early detection and isolation of rank attackers
Abstract Internet of Things (IoT) is becoming a crucial requirement for linking numerous
physical devices or gadgets to the web. Due to large volume of data exchanged, security in …
physical devices or gadgets to the web. Due to large volume of data exchanged, security in …
LA-Trickle: A novel algorithm to reduce the convergence time of the wireless sensor networks
Wireless sensor networks (WSNs) are very important to realize the Internet of Things by
connecting physical objects to the Internet. RPL (Routing Protocol for Low Power and Lossy …
connecting physical objects to the Internet. RPL (Routing Protocol for Low Power and Lossy …
Adaptive control packet broadcasting scheme for faster 6TiSCH network bootstrapping
The IPv6 over the TSCH mode of IEEE 802.15. 4e (6TiSCH) Working Group released
6TiSCH minimal configuration (6TiSCH-MC) standard for 6TiSCH network bootstrapping …
6TiSCH minimal configuration (6TiSCH-MC) standard for 6TiSCH network bootstrapping …
RPL enhancement based FL-trickle: A novel flexible trickle algorithm for low power and lossy networks
Abstract The Internet of Things (IoT) is an ubiquitous revolutionary technology, covering a
set of domains in our daily life objects. IoT makes these objects autonomous with less or no …
set of domains in our daily life objects. IoT makes these objects autonomous with less or no …
Introduction and evaluation of attachability for mobile iot routing protocols with markov chain analysis
Reliability of routing mechanisms in wireless networks is typically measured with Packet
Delivery Ratio (PDR). Basically, PDR is reported with an optimistic assumption that the …
Delivery Ratio (PDR). Basically, PDR is reported with an optimistic assumption that the …
Improved trickle algorithm toward low power and better route for the RPL routing protocol
ST Liu, SD Wang - IEEE Access, 2022 - ieeexplore.ieee.org
The IPv6 Routing Protocol for Low Power and Lossy networks (RPL) is a routing protocol
standardized by the Internet Engineering Task Force. According to the specification of the …
standardized by the Internet Engineering Task Force. According to the specification of the …