The interest in deep-sea environment is increasing both in the scientific and business
community. Nevertheless, in situ corrosion studies are difficult to be executed due to high …

The corrosion behaviour of a recently developed Al-Li-Cu-Mg alloy thick plate was
investigated using correlative immersion testing in 3.5% NaCl solution with analytical …

The IGC behaviour, OCP and microstructure of AA1460 (Al-3.12 Cu-2.14 Li-0.12 Sc-0.12 Zr,
in wt.%), following HT1 (heat treatment without predeformation) and HT2 (heat treatment …

The influence of Ag on the microstructure evolution of an aged Al–Cu–Li–Mg alloy was
studied. The coarse Cu-rich precipitates containing Ag and Mg were found during the whole …

Here, we revealed the effect of different precipitates on the corrosion behavior of an Al-Cu-Li
alloy through quasi-in-situ transmission electron microscopy observation. The corrosion …

The localised corrosion behaviour and the microstructure in an Al-2.23 Cu-0.96 Li (wt%)
alloy were systematically investigated by using scanning electron microscopy (SEM) and …

The evolution of precipitate microstructures of the Al-1.0 wt% Cu-2.5 wt% Li alloys with
different micro-alloyed elements addition was investigated during ageing at 175° C together …

The influence of various amounts of Zn addition on the microstructure and associated
intergranular corrosion of Al-2.8 Cu-1.7 Li-0.4 Mg-0.3 Mn-0.12 Zr alloys was studied using …

In this study, different pre-stretching and aging processes were applied to spray-formed Al-
Cu-Li alloy 2195. The effects of different processes on the microstructures, mechanical …

Since their development, third-generation aluminum–lithium alloys have been used in
aeronautical and other applications due to their good properties, replacing conventional Al …