Only precise industrial applications can benefit from the high-frequency performance of
variable-speed drives with low switching losses. A five-phase induction motor (FPIM) is …

V/F control has been widely applied for induction motor drive systems because of its
simplicity and reliability. However, sustained oscillation often occurs under light load, which …

In the permanent-magnet synchronous machine (PMSM) drive system, the adoption of
silicon carbide (SiC) devices brings up new challenges, such as overvoltage …

Current-source inverter is considered as a promising candidate in the permanent-magnet
synchronous machine drive system for its superior current waveforms and inherent …

Owing to the phase delay and resonance oscillations introduced by the LC filter connected
in-between the voltage-source inverter (VSI) and the induction motor (IM), the “L” and “C” …

Connection of an LC filter to the output of voltage source inverter (VSI) in squirrel cage
induction motor (SQIM) drive converts the pulse-width modulated (PWM) voltages into …

This paper presents the reactive power flow and its influence on the wide-frequency
operation of sinusoidal filter-equipped induction motor (SFE-IM) drives. A sinusoidal filter …

Inverter-side output LC filter is intended for current harmonics suppression in ultra-high-
speed permanent magnet synchronous motors (UhsPMSMs). However, the control accuracy …

LC-filtered permanent magnet synchronous motor (LC-PMSM) system is suitable for long-
cable drives but it has inherent resonant stability issues. This paper presents a modulated …

In order to estimate the core loss resistance of converter-fed induction motor accurately and
efficiently, an analytical piecewise variable-coefficient core loss model is proposed. By …