The corrosion behavior of Fe-containing directionally solidified (DS) and centrifugally cast
(CC) Al-Si-Cu-Zn alloys with either Co or Ni additions has been investigated …

In this study the effect of combination of heat treatment of consumable rod and solid solution
heat treatment before fast multiple rotation rolling (FMRR) processing on microstructure …

In this research, distinct thermomechanical processing routes, encompassing primary
annealing, cold rolling, intermediate aging, and final heat treatment have been devised. The …

Abstract The Al-Si alloy family is among the most widely used nonferrous alloys, in both cast
and wrought products. The alloys have undergone a continuous progress toward …

Abstract A novel Al-Cu-Ni composite, featuring Ni-Al3Ni2/Al3Ni core–shell intermetallics
within its matrix produced via powder metallurgy, was subjected to isothermal compression …

The study investigates the microstructural evolution and wear behavior of Al–12.6 Si–0.25
Fe–xMn alloys (x= 0, 1, 2, and 3 wt%) in dry sliding wear experiments. Manganese (Mn) …

The influence of Ni-rich intermetallic particles (IMPs) on the microstructure, high-temperature
mechanical properties, and corrosion behaviour of Al–Si–Mg–Cu–Ni alloys was …

A new Al-Si-based casting alloy with high elastic modulus in the range of 90‐100 GPa and
low density, less than 3 g/cm 3, was developed by alloy design and microstructural …

This study examined the solidification features and wear of AlSi10Mg (-Ni) alloy samples
generated under various conditions. Additions were varied from 0 to 3 wt% Ni while …

This study investigates the combined influence of Si element and reinforcing particles on the
hardness and wear performance of aluminum matrix composites. The composites in focus …