Liquid phase sintering (LPS) is a process for forming high performance, multiple-phase
components from powders. It involves sintering under conditions where solid grains coexist …

In order to improve the performances of TiCN-based cermets, researchers have paid much
attention directly towards developing various new spices of cermets. The present review will …

The paper describes briefly the historical development and presents in more detail solid-
state properties such as hardness, heat conductivity, thermal expansion and mechanical …

Abstract Al 0.3 CoCrFeNi high-entropy alloy (HEA) prepared by mechanical alloying was
used as a metal binder for the Ti (C, N)-based cermets by hot-pressing sintering. Room …

The microstructure and mechanical properties of the vacuum sintered (80-x) TiB 2-xWC−
10Co-10 Ni (x= 0, 2.5, 5, 7.5, 10, 12.5) cermets were studied by XRD, SEM, EPMA and TEM …

The present work investigated the effects of secondary carbides (Mo 2 C/WC/TaC/NbC) on
the microstructure, mechanical properties and erosion behavior of Ti (C, N)-based cermets …

This work aims to develop Co and Ni-free Ti (C, N)–Fe-based cermets which are essential
for developing cermets in the direction of green and low-cost materials. TiC and Ti (C, N) …

Cermets obtained by sintering powders of TiCN and Mo2C with cobalt or nickel binder are
studied in this paper. Different TiCN/Mo2C ratios are used in order to vary the grain size. A …

Using the traditional preparation method of TiC+ TiN powder mixture or simply the Ti (C, N)
solid-solution powder to prepare cermet cannot properly avoid the direct contact between …

The Ti (C, N)-based cermets with different Cr3C2 addition were prepared and the effects of
Cr3C2 addition on the microstructure and properties of cermets were discussed. The …