In this study, poplar laminated veneer lumber (LVL) was produced using phenol
formaldehyde adhesive, and reinforced LVL (RLVL) was produced by inserting woven glass …

The purpose of this work is to study the flexural behaviour of Populus× euroamericana I-214
low-grade glulam timber beams, internally reinforced with Glass Fibre Reinforced Polymer …

The reinforcement of solid wood and wood-based composite materials is not a new idea, but
there have been very few studies about reinforcing poplar plywood with glass fiber fabric …

In this study, shear tests and pull-off tests were carried out to investigate the bond
performance of glass fibre-reinforced polymer (GFRP) strips bonded to low-grade poplar …

This research presents the influence of two different cellulose (hydrophobic pretreated/non-
pretreated) and one flax-fiber unidirectional nonwoven low areal weight fiber reinforcements …

This paper presented an experimental structural-scale test campaign used to analyze the
flexural behavior of low-grade maritime pine (Pinus pinaster Ait.) duo timber beams …

A non-destructive method for measurement of the modulus of elasticity (MOE) was
compared with the static method on beams of Cupressus lusitanica and Populus x …

Sažetak In this study, 4 layers of 5 mm thick slats obtained by sawing method from poplar
wood were used. Plain woven GRFP with low density and grammage of 100 g/m2 (Type 1) …

In this study, plywood and reinforced plywood with glass fiber fabric were produced with
rotary peeled poplar veneers using phenol formaldehyde adhesive. Screw and nail holding …

This paper brings results of the bending testing of oak-wood laminated elements for
structural use. The bi-directional laminations were reinforced with six types of implants made …