During the last few decades, there has been significant progress in developing industry-
driven predictive models for machining operations. This paper presents the state-of-the-art in …

Titanium alloys have been widely used in the aerospace, biomedical and automotive
industries because of their good strength-to-weight ratio and superior corrosion resistance …

Although fast-/slow tool servo (F-/STS) diamond turning is widely employed to generate
micro-structured surfaces, very limited attention has been focused on the cutting force which …

The optical glass is a typical difficult-to-cut material for single-point diamond turning because
of its high hardness and low fracture toughness. The application of high-frequency vibration …

In this paper, the effects of different coolant supply strategies (using flood coolant, dry
cutting, and minimum quantity of lubricant [MQL]) on cutting performance in continuous and …

In addition to having significant effects on the service life of machined parts, residual stress
can cause large deformations during machining of thin-walled parts in aerospace field. The …

Glass-ceramic is widely used in aerospace, bionics, optics and other fields with low
expansion and high strength and low dielectric loss, but its hardness and brittleness as well …

In diamond cutting of polycrystalline metals, the influence of size effect and microstructure on
the cutting force is prominent due to the trans-scale variation of undeformed chip thickness …

This article aims at characterizing the frictional behavior of a TiAl6V4 alloy and a carbide tool
under extreme conditions corresponding to those occurring at the cutting tool–work material …

Hard Turning Residual Stress Modeling Page 1 1 Residual Stress Modeling in Machining
Presented by by Jiann-Cherng Su And Dr. Steven Liang George W. Woodruff School of Mechanical …