Core–shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis

L Kopanja, S Kralj, D Zunic, B Loncar, M Tadic - Ceramics International, 2016 - Elsevier
For the first time, particle shape analysis of silica coated iron oxide (maghemite/magnetite)
nanoparticle clusters (core–shell nanostructures) is discussed using computational …

Recycling detoxified cement asbestos slates in the production of ceramic sanitary wares

A Bernasconi, L Pellegrino, F Vergani… - Ceramics …, 2023 - Elsevier
The recycling of cement asbestos slates (CASs) thermally treated in air at 1100° C as
secondary raw material in the production of Vitreous China (VC) sanitary wares has been …

A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2 …

S Sun, H Ding, W Ao, B Zhang, Y Liu, J Zhang… - Journal of the European …, 2022 - Elsevier
TiO 2 is an ideal substitute to ZrSiO 4 ceramic opacifier, yet it is limited to application
because of the undesirable yellowing resulting from rutile formation. Herein, the SiO 2 …

Clustering of zircon in raw glaze and its influence on optical properties of opaque glaze

S Wang, C Peng, Z Huang, J Zhou, M Lü… - Journal of the European …, 2014 - Elsevier
The cluster of zircon (ZrSiO 4) is always observed on the surface of a zircon-containing raw
glaze. This work studied the cluster's formation mechanism and its influence on optical …

Preparation of a CaCO3-TiO2 composite based opaque glaze: Insight into the mechanism of opacification and glaze yellowing inhibition

S Sun, H Ding, W Ao, Y Liu, L Chang… - Journal of the European …, 2020 - Elsevier
TiO 2 is a potential alternative opacifier to ZrSiO 4, but it is restricted because it easily
causes glaze yellowing due to the formation of rutile. Herein, the CaCO 3-TiO 2 composite …

Development of anorthite based white porcelain glaze without ZrSiO4 content

M Gajek, J Partyka, A Rapacz-Kmita, K Gasek - Ceramics International, 2017 - Elsevier
The aim of this study was to develop new compositions of white glazes without the addition
of ZrSiO 4 designed for sanitary products obtained in a 12-h firing cycles at a maximum …

Thermal properties of glass-ceramic glazes with zirconium oxide added to multicomponent system SiO2-Al2O3-CaO-MgO-Na2O

K Pasiut, J Partyka - Journal of Thermal Analysis and Calorimetry, 2023 - Springer
The aim of this study was to analyse the thermal properties of glazes from the SiO2-Al2O3-
CaO-MgO-Na2O system during the addition of zirconium oxide. The paper describes the …

Gahnite white colour glazes in ZnO–R2O–RO–Al2O3–SiO2 system

M Gajek, J Partyka, M Leśniak, A Rapacz-Kmita… - Ceramics …, 2018 - Elsevier
The paper focuses on the results of research on the development of newly designed white
glazes without the addition of traditional opacifiers such as ZrO 2 or ZrSiO 4, intended for …

FTIR and MAS NMR study of the zinc aluminosilicate ceramic glazes

M Leśniak, J Partyka, M Gajek, M Sitarz - Journal of Molecular Structure, 2018 - Elsevier
Raw glazes in the SiO 2 single bondAl 2 O 3 single bondCaOsingle bondMgOsingle
bondNa 2 Osingle bondK 2 Osingle bond ZnO system with ZnO additions (0, 5, 10, 15 and …

Composition effects on the whiteness and physical-mechanical properties of traditional sanitary-ware glaze

K Boudeghdegh, V Diella, A Bernasconi… - Journal of the European …, 2015 - Elsevier
Whiteness and physical-mechanical characteristics of sanitary glazes are usually controlled
and improved by changing chemical composition of the raw materials. In this study, ten …