Sliding wear of conventional and suspension sprayed nanocomposite WC-Co coatings: an invited review
The global thermal spray coatings market was valued at USD 10.1 billion in 2019 and is
expected to grow at a compound annual growth rate of 3.9% from 2020 to 2027. Carbide …
expected to grow at a compound annual growth rate of 3.9% from 2020 to 2027. Carbide …
Influence of deposition parameters on Tribological Performance of HVOF Coating: A review
Any mechanical component stationary or in relative motion is exposed to severe surface
phenomena like corrosion, wear, abrasion etc. To address these issues various surface …
phenomena like corrosion, wear, abrasion etc. To address these issues various surface …
Enhanced high temperature mechanical properties of WC-Co cemented carbides by VC addition
X Li, L Wang, Y Liu, J Ye - International Journal of Refractory Metals and …, 2023 - Elsevier
WC-Co cemented carbide are widely used in industries for cutting tool due to their excellent
hardness, fracture strength and wear resistance, but the high temperature mechanical …
hardness, fracture strength and wear resistance, but the high temperature mechanical …
Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings
High velocity oxy-fuel (HVOF) thermal spray process has shown obvious advantages over
other surface hardening techniques when depositing WC-based layers, such as the laser …
other surface hardening techniques when depositing WC-based layers, such as the laser …
Influence of WC grain size on the microstructure and wear property enhancement of 18Ni300 coatings
J Yi, B Niu, L Pan, X Zou, Y Cao, X Wang, J Luo… - Surface and Coatings …, 2022 - Elsevier
Abstract 18Ni300-based cladding layers with micro/nano WC additives were fabricated via
plasma transferred arc welding (PTA) technology. This work investigates the influence of WC …
plasma transferred arc welding (PTA) technology. This work investigates the influence of WC …
[HTML][HTML] Mechanism for magnetic field induced structural relaxation and accompanying fracture toughness improvement of the thermal spraying coating
C Qian, Q Liu, X Xiong, B Ye, Z Li, K Li, S Ying… - Materials & Design, 2022 - Elsevier
Fracture toughness is critical for the fatigue life of the cemented carbide coatings widely
used in the aviation fields, and the development of an economical and effective post …
used in the aviation fields, and the development of an economical and effective post …
Erosion behaviour of WC–10Co–4Cr coating on 23-8-N nitronic steel by HVOF thermal spraying
A Sharma, SK Goel - Applied surface science, 2016 - Elsevier
Abstract WC–10Co–4Cr coating was deposited by high-velocity oxy-fuel (HVOF) process on
cast and solution treated (1220° C/150 min) 23-8-N nitronic steel substrates. Solution treated …
cast and solution treated (1220° C/150 min) 23-8-N nitronic steel substrates. Solution treated …
The effect of temperature on the dry sliding wear behavior of HVOF sprayed nanostructured WC-CoCr coatings
The sliding wear properties of high-velocity oxygen-fuel (HVOF) sprayed nanostructured WC-
CoCr cermet coatings against Al 2 O 3 under dry friction at different temperatures were …
CoCr cermet coatings against Al 2 O 3 under dry friction at different temperatures were …
Corrosion and wear of coatings fabricated by HVOF-spraying of nanostructured and conventional WC–10Co-4Cr powders on Al7075-T6
AG Lekatou, D Sioulas, D Grimanelis - International Journal of Refractory …, 2023 - Elsevier
The present work compares WC-10Co-4Cr coatings fabricated by HVOF spraying of a
conventional powder (1.33±0.67 μm) and a nanostructured powder (0.17±0.06 μm) on …
conventional powder (1.33±0.67 μm) and a nanostructured powder (0.17±0.06 μm) on …
[HTML][HTML] Micromechanical, corrosion and wet sliding wear behaviours of Co-28Cr-6Mo alloy: wrought vs. LPBF
VG Efremenko, AG Lekatou, YG Chabak… - Materials Today …, 2023 - Elsevier
The work is dedicated to the comparative study of a Co-28Cr-6Mo alloy fabricated by two
methods (forging and laser bed fusion (LPBF)), in terms of micro-mechanical, corrosion, and …
methods (forging and laser bed fusion (LPBF)), in terms of micro-mechanical, corrosion, and …