Aerospace components, such as aircraft fuselage panels, pressurized container and turbine
blades are exposed to in-plane biaxial fatigue loading in service. Assessment of the effect of …

Laser shock peening (LSP) is an innovative surface treatment, which has been successfully
applied in aero-engine compressor blades to improve high cycle fatigue performance. Deep …

The present study examines the effect of planar biaxial loadings on fatigue crack growth in
an austenitic stainless steel and an aluminum alloy. Furthermore, phase-shifted loading with …

In this paper, aimed at high strength steel for marine structures, a series of crack propagation
tests were designed and carried out, and the influence of different load forms on crack …

A new type of alloy, modified based on 6005A alloy, with addition of 0.06% Sc was prepared
by ingot metallurgy. The alloy ingots were homogenized, extruded, quenched and solution …

The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys
was analyzed. Fatigue tests under constant-amplitude loading with overload peak were …

Nickel-based single crystal creep's properties are commonly calculated according to the
rupture strength under constant load. The creep deformation of turbine blades is not only …

Fatigue crack initiation and propagation behavior were investigated on a tubular specimen
of Al 7075 alloy subjected to multiaxial mixed mode bending-torsional loadings. Tests under …

The effect of tensile overload on fatigue crack behaviors of 2205 duplex stainless steel has
been studied by experimental and finite element methods (FEM). The residual stresses were …

As a high strength and commercial steel, Q420 is widely employed in many engineering
applications. In this paper, a series of experiments was conducted to investigate the fatigue …