In the past few decades, the applicability of spout fluidized beds has been augmented
immensely. This is not only due to the fact that these systems combine characteristics of …

Spouted bed dryers are well known for their high efficiency at low and moderate
temperatures. The design of industrial scale dryers requires the estimation of heat and mass …

The particle mixing mechanism affects the rate of the process and the achievable
homogeneity. This paper presents a numerical study of the particle motion and mixing in flat …

The effect of the particle size on the mixing and segregation in a spout-fluid bed has been
investigated (Zhang, Y.; Zhong, WQ; Jin, BS; Xiao, R. Mixing and segregation behavior in a …

The mixing and segregation behavior of a binary mixture have been investigated
experimentally in a spout-fluid bed. Three types of binary mixtures were used by mixing …

The use of glass fiber reinforced concrete (GFRC) in the construction industry is increasing
due to its mechanical and physical properties. Waiting time of concrete in the mold and the …

A draft tube spout fluid bed coating system was designed to coat porous aerogel particles in
a size range from 0.1 to 2mm in diameter. Its primary objective was to insure that just the …

Detailed knowledge of particle mixing dynamic is essential in successfully designing and
reasonably operating spout-fluid reactor. Over the years, numerous methods for the …

抄録< jats: title> Abstract</jats: title>< jats: p> Minimum spouting velocity was measured in a
0.12 m cylindrical spout‐fluid bed with a draft tube. The effects of fluidizing gas flow rate …

The particle mixing behavior has been investigated experimentally in a spout-fluid bed. The
bed material used is polypropylene particles, and the tracer employed is chosen from silica …