Carbon fiber reinforced polymer (CFRP) is widely used in the lightweight design of high-
speed trains due to its high specific strength. In order to further reduce the weight of the high …

This paper presents proposed characteristics of the SN curve using the 2 and 3-parameter
Weibull distribution for fatigue limit and limited life respectively. The parameters of the …

This paper presents the results of the static tensile and fatigue life tests under rotating
bending of round 1.4301 (AISI 304) steel samples. The fatigue tests were carried out on …

To calculate fatigue life in high-cycle region, the SN characteristics for the material or
construction element (depending on the calculation model employed) must be obtained …

The study verifies the sensitivity of selected construction materials (S235JR structural steel
and 1.4301 stainless steel) to the statistical size effect. The P–S–N curves were determined …

Linear elastic fracture mechanics (LEFM) approaches are seldom used to analyze fatigue
problems in hydraulic turbomachinery, where extremely simplified fatigue models are …

A new calculation model for the fatigue life of rolling bearings is proposed, which is
applicable to various operating conditions. The new model is based on the Palmgren-Miner …

The paper presents guidelines included in the ISO 12107: 2003 standard regarding the
number of samples for determining the fatigue characteristics in the high cycle range. The …

The paper presents its own proposition of an analytical method for determining the SN
characteristic for aluminium material. The method is based on the value of the slope …

The study presents two methods to estimate the SN curve. The first method is commonly
known as the traditional approach and well documented in the normative sources. It consists …