A short review on selective laser melting of H13 steel
J Wang, S Liu, Y Fang, Z He - The International Journal of Advanced …, 2020 - Springer
In this review, the present situation of H13 tool steel formed by selective laser melting (SLM)
is introduced in detail. This review shows the current academic exploration and …
is introduced in detail. This review shows the current academic exploration and …
Evaluation of strain-rate sensitivity of selective laser melted H13 tool steel using nanoindentation tests
VL Nguyen, E Kim, SR Lee, J Yun, J Choe, D Yang… - Metals, 2018 - mdpi.com
This paper demonstrates the successful printing of H13 tool steel by a selective laser melting
(SLM) method at a scan laser speed of 200 mm/s for the best microstructure and mechanical …
(SLM) method at a scan laser speed of 200 mm/s for the best microstructure and mechanical …
Characterization of the mechanical behavior of colorado mason sand at grain-level by nanoindentation
Colorado Mason sand has received increasing attention for use as a model granular
material for the investigation of the soil response under a blast. The grain-level mechanical …
material for the investigation of the soil response under a blast. The grain-level mechanical …
Viscoelastic-damage interface model formulation with friction to simulate the delamination growth in mode II shear
MS Goodarzi, H Hosseini-Toudeshky - Mechanics of Time-Dependent …, 2017 - Springer
In this paper a formulation of a viscoelastic-damage interface model with friction in mode-II is
presented. The cohesive constitutive law contains elastic and damage regimes. It has been …
presented. The cohesive constitutive law contains elastic and damage regimes. It has been …
Comparison of Nano-Mechanical Behavior between Selective Laser Melted SKD61 and H13 Tool Steels
J Yun, VL Nguyen, J Choe, DY Yang, HS Lee, S Yang… - Metals, 2018 - mdpi.com
Using nanoindentation under various strain rates, the mechanical properties of a laser
powder bed fusion (PBF) SKD61 at the 800 mm/s scan speed were investigated and …
powder bed fusion (PBF) SKD61 at the 800 mm/s scan speed were investigated and …
Evaluation of Strain-Rate Sensitivity of Selective Laser Melted H13 Tool Steel Using Nanoindentation Tests.
E Kim, SR Lee, J Yun, J Choe, D Yang… - Metals (2075 …, 2018 - search.ebscohost.com
This paper demonstrates the successful printing of H13 tool steel by a selective laser melting
(SLM) method at a scan laser speed of 200 mm/s for the best microstructure and mechanical …
(SLM) method at a scan laser speed of 200 mm/s for the best microstructure and mechanical …