This book presents an overview of recent and emerging additive manufacturing (AM)
techniques and their applications. It explains several of the processes developed using …

A soft magnetic MnZn-type ferrite is considered for high frequency applications. First, the
morphological, structural, and chemical composition of the material are presented and …

Laser cladding is an effective way to improve the wear resistance of mechanical
components. In this study, the composite carbide (Ti, V) C reinforced Fe based coating was …

NdFeB thin films, showing a notable out-of-plane c-axis texture, were prepared by
radiofrequency plasma-assisted pulsed laser deposition technique. Their optical …

CoNiMnP permanent magnetic alloys were electrodeposited on copper and brass
substrates from a bath containing 26 g/L CoCl2· 6H2O, 24 g/L NiCl2· 6H2O, 3.6 g/L MnSO4 …

In the present research NdFeB thin films coupled with buffer and capping layer of W were
formed on Si/SiO2 substrate by means of RF magnetron sputtering. The system was …

In the present research NdFeB thin films coupled with buffer and capping layer of W were
formed on Si/SiO< sup> 2 substrate by means of RF magnetron sputtering. The system was …

در این پژوهش لایه های نازک نئودمیوم آهن بور با لایه بافر و لایه محافظ تنگستن بر زیرلایه
Si/SiO2 به روش پراکنش امواج رادیویی مگنترونی تولید شد. سیستم ایجاد شده در دماهای 450, 500 …‎

Abstract The NdFeB/Co multilayer films were prepared by magnetron sputtering. After that,
the samples were annealed at 600° C for 20 min. The surface morphology, phase structures …

A review and experimental investigation were realized in this study. The review includes
permanent magnets, the fabrication as well as the image processing techniques. In this …