Microstructure and corrosion evaluations for Al2O3–leaded brass matrix nanocomposites in marine solution
Hancing the corrosion resistance of various composites is a challenge; however, the
mechanical characteristics of composites are usually high without any risks. Thus, in this …
mechanical characteristics of composites are usually high without any risks. Thus, in this …
[HTML][HTML] Plasma nitriding effect on tribological and corrosion properties of Stellite 6 and 12 PTA weld clad hardfaced on stainless steel 410
AG Poshtahani, S Roostaie, M Azadi - Results in Surfaces and Interfaces, 2023 - Elsevier
Cladded Stellites on steel substrates are utilized vastly in harsh environments. Since the
plasma nitriding process can raise the tribological behavior of the material surface. Thus, the …
plasma nitriding process can raise the tribological behavior of the material surface. Thus, the …
[HTML][HTML] The effect of various treatment parameters in duplex plasma nitrided and diamond-like carbon coating on high-cycle fatigue and fretting fatigue lifetimes of …
This paper investigates the impact of duplex plasma nitriding and diamond-like carbon
(DLC) coatings on the pure fatigue and fretting fatigue properties of 16MnCr5 steel extracted …
(DLC) coatings on the pure fatigue and fretting fatigue properties of 16MnCr5 steel extracted …
Effect of a surface treatment consisting of electron beam remelting and gas nitriding on the corrosion resistance of cast iron
A Holst, H Biermann, A Buchwalder - Materials and Corrosion, 2024 - Wiley Online Library
Commercially available gray‐solidified cast iron exhibits reduced load‐carrying capacity
under locally concentrated pressure with simultaneous sliding stress. Electron beam …
under locally concentrated pressure with simultaneous sliding stress. Electron beam …
[HTML][HTML] Electrochemical characteristics of nano-structure TiCN coatings on the tool steel deposited by PACVD in various solutions
This study investigates The electrochemical behavior of various nano-structure TiCN
coatings prepared using a plasma-assisted chemical vapor deposition technique in acidic …
coatings prepared using a plasma-assisted chemical vapor deposition technique in acidic …
Effect of nitriding temperature and its effects on the corrosion and wear resistance of 304 austenitic stainless steel
T Peng, L Wang - Surface Topography: Metrology and Properties, 2023 - iopscience.iop.org
Rapid plasma nitriding of AISI 304 austenitic stainless steel (304SS) was carried out at 440,
460 C and 480 C for 1 h in a mixture of NH 3 and N 2 with a ratio of 1: 2. The phase …
460 C and 480 C for 1 h in a mixture of NH 3 and N 2 with a ratio of 1: 2. The phase …
Influence of compound layer on the corrosion resistance of low alloy steel in a 3.5% NaCl solution
L Wang - Engineering Research Express, 2024 - iopscience.iop.org
Samples of AISI 4140 low alloy steel were nitrided at different conditions by using plasma
nitriding. The optical microscopy observation and x-ray diffraction analysis showed that a …
nitriding. The optical microscopy observation and x-ray diffraction analysis showed that a …