With the increasing demands to generate complex parts on ever-more advanced, but difficult-
to-cut materials, a group of technologies, generically called High Energy Fluid Jet Machining …

In pipelines used for petroleum production and transportation, sand particles may be present
in the multi-phase flow of oil and gas and water. The Acoustic Emission (AE) measurement …

Erosive wear due to formation sand in petroleum production is a major threat to pipeline
integrity which needs to be monitored continuously to maintain operational success, safety …

An in-situ acoustic emission (AE) monitoring technique has been implemented in a
submerged jet impingement (SIJ) system in an effort to investigate the effect of sand particle …

Slurry erosion has been recognized as a serious problem in many industrial applications. In
slurry flows, the estimation of the amount of incident kinetic energy that transmits from …

A series of systematic impact tests have been carried out to investigate the influence of
particle size, free stream velocity, particle impact angle, and nominal particle concentration …

Impact forces are one of the mechanisms for grinding in mill. This takes place when the
particles elevated by the lifters get into cascade motion and their fall on the load causes the …

In this research, we utilize image processing to analyze surfaces acquired from slurry-
erosion tests carried out on AISI 5117 steel at various velocities and impact angles of 30 deg …

The estimation of energy dissipated during multiple particle impact is a key aspect in
evaluating the abrasive potential of particle-laden streams. This paper reports the results of …

A screened waveguide with a 90° elbow, which had a rubber surface to reduce noise
generations and a steel/air interface to block noise propagations, was designed to measure …