Kinetic analysis of the curing process of biobased epoxy resin from epoxidized linseed oil by dynamic differential scanning calorimetry
The curing process of epoxy resin based on epoxidized linseed oil (ELO) is studied using
dynamic differential scanning calorimetry (DSC) in order to determine the kinetic triplet (Ea, f …
dynamic differential scanning calorimetry (DSC) in order to determine the kinetic triplet (Ea, f …
Effect of polyalcohols on the anticorrosive behaviour of alkyd coatings prepared with drying oils
A Hadzich, GA Gross, M Leimbach, A Ispas… - Progress in Organic …, 2020 - Elsevier
Alkyd paints contain resins derived from vegetable oils. Alkyd resins have regained their
importance since they are mostly composed of bio-based constituents recovered from …
importance since they are mostly composed of bio-based constituents recovered from …
Synthesis and Characterization of Short Alkyd Resin Based on Sesame Seed Oil as Binder for Coating Industry
KM Kalu, A Aliyu, EK Chinedu… - Asian Journal of …, 2023 - archive.sdpublishers.com
Alkyd resin of 40% oil length was synthesized from the polyesterification reaction of glycerol,
pthalic anhydride and sesame seed oil. Physicochemical properties such as iodine value …
pthalic anhydride and sesame seed oil. Physicochemical properties such as iodine value …
Formulation of Emulsion Paint Derived from Waste Expanded Polystyrene as a Binder
U Titus, KM Kalu, M Saa-Aondo… - Asian Journal of …, 2024 - classical.goforpromo.com
Emulsion paint, also known as water-based paint, is a type of paint that consists of small
water droplets suspended in a binder. The binder, typically made of acrylic or vinyl acetate …
water droplets suspended in a binder. The binder, typically made of acrylic or vinyl acetate …
Effect of Drying on Textured Coat Synthesized from Waste Glass for Building Application
Interior and exterior coat samples were collected and subjected to viscosity (ASTM D-4741),
adhesion (ASTM D-3359), dry-time (ASTM D-1640 M), and abrasion (ASTM D-4060) …
adhesion (ASTM D-3359), dry-time (ASTM D-1640 M), and abrasion (ASTM D-4060) …