EMD-based filtering using similarity measure between probability density functions of IMFs

A Komaty, AO Boudraa, B Augier… - IEEE Transactions on …, 2013 - ieeexplore.ieee.org
This paper introduces a new signal-filtering, which combines the empirical mode
decomposition (EMD) and a similarity measure. A noisy signal is adaptively broken down …

FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration

J Yan, B Augier, A Korobenko, J Czarnowski… - Computers & fluids, 2016 - Elsevier
Fluid–structure interaction (FSI) analysis of the Mirage Drive, a bioinspired propulsion
system utilizing compliant hydrofoils designed and built by Hobie Cat Co, is performed. The …

Experimental and numerical FSI study of compliant hydrofoils

B Augier, J Yan, A Korobenko, J Czarnowski… - Computational …, 2015 - Springer
A propulsion system based on tandem hydrofoils is studied experimentally and numerically.
An experimental measurement system is developed to extract hydrodynamic loads on the …

[HTML][HTML] FSI simulations of wind gusts impacting an air-inflated flexible membrane at Re= 100,000

G De Nayer, M Breuer, K Boulbrachene - Journal of Fluids and Structures, 2022 - Elsevier
The paper addresses the simulation of turbulent wind gusts hitting rigid and flexible
structures. The purpose is to show that such kind of complex fluid–structure interaction (FSI) …

FSI investigation on stability of downwind sails with an automatic dynamic trimming

M Durand, A Leroyer, C Lothodé, F Hauville… - Ocean …, 2014 - Elsevier
Gennakers are lightweight and flexible sails, used for downwind sailing configurations.
Qualities sought for this kind of sail are propulsive force and dynamic stability. To simulate …

Upwind sail aerodynamics: A RANS numerical investigation validated with wind tunnel pressure measurements

IM Viola, P Bot, M Riotte - International Journal of Heat and Fluid Flow, 2013 - Elsevier
The aerodynamics of a sailing yacht with different sail trims are presented, derived from
simulations performed using computational fluid dynamics. A Reynolds-averaged Navier …

The production of marine iron objects in Europe following the first industrial revolution: The Akko Tower Shipwreck test case

N Iddan, D Ashkenazi, D Cvikel - Applied Sciences, 2023 - mdpi.com
Four ferrous objects, a winch, a heart-shaped shackle, a deadeye strap with a futtock plate,
and a stud-link chain controller, that were retrieved from the Akko Tower shipwreck were …

Research on sail aerodynamics performance and sail-assisted ship stability

J He, Y Hu, JJ Tang, S Xue - Journal of Wind Engineering and Industrial …, 2015 - Elsevier
Through the use of wind energy the goals of energy conservation and emission reduction
could be realized for ocean-going ships. In this paper the performance coefficients of a sail …

A novel full scale laboratory for yacht engineering research

F Fossati, I Bayati, F Orlandini, S Muggiasca… - Ocean …, 2015 - Elsevier
This paper presents an overview of the Lecco Innovation Hub project and in particular to the
Sailing Yacht Lab project a 10 m length sailing yacht which aims to be a full scale …

Fluid–structure interaction of downwind sails: a new computational method

A Cirello, F Cucinotta, T Ingrassia, V Nigrelli… - Journal of Marine …, 2019 - Springer
The spreading of high computational resources at very low costs led, over the years, to
develop new numerical approaches to simulate the fluid surrounding a sail and to …