A review of the corrosion behavior of conventional and additively manufactured nickel-aluminum bronze (NAB) alloys: current status and future challenges
K Morshed-Behbahani, DP Bishop, A Nasiri - Materials Horizons, 2023 - pubs.rsc.org
The growing demand for materials with exceptional corrosion resistance and mechanical
properties in the aerospace and ocean industries has led to increased research interest in …
properties in the aerospace and ocean industries has led to increased research interest in …
[HTML][HTML] Effect of compressive stress on cavitation erosion-corrosion behavior of nickel-aluminum bronze alloy
Z Qin, X Li, D Xia, Y Zhang, C Feng, Z Wu… - Ultrasonics Sonochemistry, 2022 - Elsevier
The effect of compressive stress on cavitation erosion-corrosion behavior of nickel-
aluminum bronze alloy was investigated, and the results showed that the alloy exhibited …
aluminum bronze alloy was investigated, and the results showed that the alloy exhibited …
Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach
S Kandasamy, P Rathinasamy… - Journal of Adhesion …, 2022 - Taylor & Francis
Abstract In recent years, Aluminium Alloy 7075 plays a vital role in the manufacturing of
aircraft wing and fuselage skin due to its light weight and specific strength characteristic …
aircraft wing and fuselage skin due to its light weight and specific strength characteristic …
Correlation of microstructure with cavitation erosion behaviour of a nickel-aluminum bronze in simulated seawater
The correlation of microstructure with cavitation erosion (CE) behaviour of Ni-Al bronze in
simulated seawater has been clarified. It is found that there exist a large number of …
simulated seawater has been clarified. It is found that there exist a large number of …
Load-dependent tribocorrosion behaviour of nickel-aluminium bronze in artificial seawater
B Zhang, J Wang, F Yan - Corrosion Science, 2018 - Elsevier
Dependence of the tribocorrosion behaviour of nickel-aluminium bronze (NAB) on load in
artificial seawater was investigated. Results from electrochemical measurements revealed …
artificial seawater was investigated. Results from electrochemical measurements revealed …
Effect of oxide film on the cavitation erosion-corrosion behavior of nickel-aluminum bronze alloy
Z Qin, L Cao, Y Deng, C Zhong, W Hu, Z Wu - Corrosion, 2020 - meridian.allenpress.com
The effect of oxide film on the cavitation erosion-corrosion of nickel-aluminum bronze (NAB)
alloy in 3.5 wt% NaCl solution was investigated via pulse and continuous cavitation modes …
alloy in 3.5 wt% NaCl solution was investigated via pulse and continuous cavitation modes …
Fabrication of Ni60–SiC coating on carbon steel for improving friction, corrosion properties
C Zhang, S Pei, H Ji, Y Cui, M Li - Materials Science and …, 2017 - journals.sagepub.com
The Ni60 and SiC–Ni60 composite coatings were successfully obtained by high-frequency
inductive cladding on the AISI 1045 steel surface. The influence of SiC nanoparticles on the …
inductive cladding on the AISI 1045 steel surface. The influence of SiC nanoparticles on the …
Refurbishing damaged surfaces of nickel-aluminum bronze propellers: A robotic approach using gas metal arc welding and friction stir processing
A Ahmad - AIP Conference Proceedings, 2021 - pubs.aip.org
Gas Metal Arc Welding (GMAW) are well known due to its cost effective and easy
accessibility. The technique is commonly used in shipping maintenance to repair corrosion …
accessibility. The technique is commonly used in shipping maintenance to repair corrosion …
Investigation on the corrosion and cavitation erosion behaviors of the cast and friction stir processed Ni-Al bronze in sulfide-containing chloride solution
QN Song, N Xu, W Gu, YF Bao, CY Wei, FS Ni… - International Journal of …, 2017 - Elsevier
Corrosion and cavitation erosion behaviors of the cast and friction stir processed (FSP) Ni-Al
bronze (NAB) in sulfide-containing (polluted) 3.5% NaCl solution were investigated in the …
bronze (NAB) in sulfide-containing (polluted) 3.5% NaCl solution were investigated in the …
Corrosion and Cavitation Erosion Behaviors of the Thermo-Mechanically Affected Zone (TMAZ) in a Friction Stir Processed Ni-Al Bronze
QN Song, YF Bao, YF Jiang, YG Zheng, DR Ni… - …, 2016 - meridian.allenpress.com
The microstructure, corrosion, and cavitation erosion behaviors of the thermo-mechanically
affected zone (TMAZ) in a friction stir processed Ni-Al bronze were investigated. The TMAZ …
affected zone (TMAZ) in a friction stir processed Ni-Al bronze were investigated. The TMAZ …