Geopolymers and fiber-reinforced concrete composites in civil engineering
This paper discusses the influence of fiber reinforcement on the properties of geopolymer
concrete composites, based on fly ash, ground granulated blast furnace slag and …
concrete composites, based on fly ash, ground granulated blast furnace slag and …
Investigation of fracture mechanics, physical and dynamic properties of UHPCs containing PVA, glass and steel fibers
Fracture energy, non-destructive testing, some physical and mechanical tests and
microstructural investigations were performed on 18-month 0.7 V%, 1.3 V% and 2.0 V% PVA …
microstructural investigations were performed on 18-month 0.7 V%, 1.3 V% and 2.0 V% PVA …
Current status and future challenges of autoclaved aerated concrete masonry
Due to its various advantages, autoclaved aerated concrete (AAC) has been gaining
popularity in masonry construction in recent years, and consequently, numerous studies …
popularity in masonry construction in recent years, and consequently, numerous studies …
Experimental and numerical investigation on post-fire seismic performance of light weight aggregate reinforced concrete beams
The stringent demand for designing fire-resistant structures in recent years has triggered a
good deal of effort into theoretical and experimental studies. Structures may be exposed to …
good deal of effort into theoretical and experimental studies. Structures may be exposed to …
Out-of-plane flexural behavior of autoclaved aerated concrete block masonry walls strengthened with high-ductility concrete
Z Qiu, M Deng, W Zhang, Z Wu, Z Dong, T Li - Construction and Building …, 2023 - Elsevier
Masonry walls are susceptible to out-of-plane failures during seismic events. Therefore, this
study investigated the out-of-plane flexural behavior of autoclaved aerated concrete (AAC) …
study investigated the out-of-plane flexural behavior of autoclaved aerated concrete (AAC) …
Strengthening of autoclaved aerated concrete (AAC) masonry wallettes with fabric reinforced cementitious matrix for in-plane shear and out-of-plane loads
Autoclaved aerated concrete (AAC) masonry is popularly used for the construction of infill
and partition walls in the RC and steel-framed structures. However, past research …
and partition walls in the RC and steel-framed structures. However, past research …
Out-of-plane seismic performance of bed-joint reinforced Autoclaved Aerated Concrete (AAC) infill walls damaged under cyclic in-plane displacement reversals
The infill walls made of Autoclaved Aerated Concrete (AAC), which is a lightweight, fire
resistant and energy efficient material, provide effective insulation solutions for building …
resistant and energy efficient material, provide effective insulation solutions for building …
Autoclaved aerated concrete masonry wallettes strengthened using TRC overlay under out-of-plane load
T Li, Z Qiu, Y Zhang, M Deng, W Huang - Journal of Building Engineering, 2024 - Elsevier
The objective of this study is to assess the out-of-plane flexural responses of autoclaved
aerated concrete (AAC) masonry wallettes externally strengthened with textile reinforced …
aerated concrete (AAC) masonry wallettes externally strengthened with textile reinforced …
Utilization of steel wool fibers in AAC blocks containing a mix of flyash, CDW, and glass powder
The present article discusses the mechanical performance of autoclaved aerated concrete
(AAC) blocks prepared by different constituents ie, OPC-53, hydrated lime, flyash, and …
(AAC) blocks prepared by different constituents ie, OPC-53, hydrated lime, flyash, and …
Influence of Waste Basalt Powder Addition on the Microstructure and Mechanical Properties of Autoclave Brick
P Kostrzewa-Demczuk, A Stepien, R Dachowski… - Materials, 2023 - mdpi.com
In the production of building materials, there has been an increased interest in the use of by-
products and industrial waste in recent years. Such modifications make it possible to solve …
products and industrial waste in recent years. Such modifications make it possible to solve …