Tribological performance of a cost-effective CrFeNiAl0. 3Ti0. 3 high entropy alloy based self-lubricating composite in a wide temperature range

C Nguyen, AK Tieu, G Deng, D Wexler, TD Vo… - Tribology …, 2022 - Elsevier
A cost-effective HEA based self-lubricating composite was fabricated using CrFeNiAl 0.3 Ti
0.3 as matrix and Ag as solid lubricant by hot pressing sintering (HPS), with Ag particles …

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0. 2 high entropy alloy

G Deng, AK Tieu, X Lan, L Su, L Wang, Q Zhu… - Tribology …, 2020 - Elsevier
A systematic experimental study has been conducted to evaluate the sliding tribological
properties of CoCrFeNiMo 0.2 high entropy alloy at room temperature. The results showed …

Investigation into reciprocating dry sliding friction and wear properties of bulk CoCrFeNiMo high entropy alloys fabricated by spark plasma sintering and subsequent …

G Deng, AK Tieu, L Su, P Wang, L Wang, X Lan, S Cui… - Wear, 2020 - Elsevier
For the first time, a systematic investigation into effect of Mo element concentration on the
crystal lattice constant, microhardness, and reciprocating dry sliding friction and wear …

Research on mobile impulse purchase intention in the perspective of system users during COVID-19

W Zhang, X Leng, S Liu - Personal and Ubiquitous Computing, 2023 - Springer
COVID-19 has caused a serious impact on the global economy. Effectively stimulating
consumption has become a momentous mission in responding to the impact of the …

[HTML][HTML] Excellent tribological performance at elevated temperatures and associated mechanisms of novel AlCoCrFeNi-MoS2 solid self-lubricating composite

TD Vo, G Deng, AK Tieu, L Su, X Wu, C Nguyen… - Tribology …, 2023 - Elsevier
A high entropy alloy based self-lubricating composite with good mechanical and tribological
properties was developed, using AlCoCrFeNi as matrix and MoS 2 as lubricant. In addition …

High temperature tribological performance of a cost-effective eutectic high entropy alloy Al0. 8CrFeNi2. 2: Comparison with AlCoCrFeNi2. 1

TD Vo, AK Tieu, D Wexler, L Su, C Nguyen, J Yang… - Tribology …, 2023 - Elsevier
A comprehensive comparison study on microstructure, mechanical and high temperature
tribological performance of as-cast Al 0.8 CrFeNi 2.2 and AlCoCrFeNi 2.1 eutectic high …

The effect of heat treatment on the microstructure and mechanical properties of 2D nanostructured Au/NiFe system

T Zubar, V Fedosyuk, D Tishkevich, O Kanafyev… - Nanomaterials, 2020 - mdpi.com
Nanostructured NiFe film was obtained on silicon with a thin gold sublayer via pulsed
electrodeposition and annealed at a temperature from 100 to 400° C in order to study the …

Microstructure evolution and frictional wear behavior of laser cladding FeCrCoNiMo0. 5Wx high-entropy alloy coatings

X Duan, S Wang, G Wang, S Gao, L Wang, X Yang - Intermetallics, 2023 - Elsevier
Abstract FeCrCoNiMo 0.5 W x (x= 0, 0.25, 0.5, 0.75, 1.0) HEA coatings were prepared on
Q235 surfaces by laser cladding technique, the microstructure and phase composition of the …

Mechanisms of remarkable wear reduction and evolutions of subsurface microstructure and nano-mechanical properties during dry sliding of nano-grained Ti6Al4V …

G Deng, Y Chong, L Su, L Zhan, P Wei, X Zhao… - Tribology …, 2022 - Elsevier
A comprehensive investigation into dry sliding wear and associated evolutions of subsurface
microstructure and nano-mechanical properties of a bulk nano-grained Ti6Al4V alloy (NG …

Study of wear and friction properties of a Co-free CrFeNiAl0. 4Ti0. 2 high entropy alloy from 600 to 950° C

C Nguyen, AK Tieu, G Deng, D Wexler, B Tran… - Tribology …, 2022 - Elsevier
Sliding friction and wear performance of an economical Co-free CrFeNiAl 0.4 Ti 0.2 high
entropy alloy was studied over a wide temperature range. The homogenised alloy …