The development of new adhesives has allowed to expand the application of bonding into
the most diverse industrial fields. This review article presents the commonly used …

Composite laminate has extensive usage in the aerospace and automotive industries. Thus
delamination, one of its most prevalent and challenging failure modes, has attracted …

CARALL and GLARE type multidirectional fiber metal laminates were subjected to
interlaminar fracture toughness tests by End Notched Flexure method. The critical strain …

The crack tip of the asymmetric double cantilever beam (ADCB) under mode-I loading is
often accompanied by a proportion of mode II component, thus it is a typical mixed-mode I/II …

A method is presented for the analysis of laminated beams with general stacking sequences
and arbitrarily located, through-the-width delaminations. First, the relative displacements …

This paper presents an efficient analytical solution strategy to determine the adhesive
stresses in balanced and unbalanced adhesively bonded joints with mixed force loading …

The proposed semi-layerwise approach captures the mechanical behavior of delaminated
composite plates using four equivalent single layers independently of the lay-up. Two …

This work aims at studying the mixed-mode delamination process in Moment-Loaded
Double Cantilever Beam (MLDCB) specimens. The delamination problem is addressed both …

基于经典层合板理论及黏聚区模型, 针对纯Ⅱ 型断裂ENF 试件的裂纹扩展,
建立了含一般分层裂纹层合板的理论模型. 相较于传统的梁理论, 该文模型充分考虑了黏聚区的 …

Closed-form solutions for cohesive zone modeling within the framework of classical
lamination theory (CLT), for the popular mode I double cantilever beam (DCB) test, the mode …