Deciphering the interdependent impact of process parameters in friction stir welding-Part I: an overview of the challenges and way forward
The versatility of FSW as a joining technique for ferrous and non-ferrous metals depends on
fine-tuned process parameters. To date, reports of mixed success exist in the literature on …
fine-tuned process parameters. To date, reports of mixed success exist in the literature on …
Microstructure and corrosion characterization of the interfacial region in dissimilar friction stir welded AA5083 to AA7023
Microstructure and the corrosion behaviour of friction stir weld region in an aluminium
AA5083/AA7023 dissimilar joint was studied using SEM/EDS, potentiodynamic polarization …
AA5083/AA7023 dissimilar joint was studied using SEM/EDS, potentiodynamic polarization …
Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM
A lap joint of AA3003 and pure copper was produced by friction stir welding and the induced
interfaces were investigated. Interfacial regions were characterized by SEM–EDS, AFM …
interfaces were investigated. Interfacial regions were characterized by SEM–EDS, AFM …
Friction stir welding and its applications: An overview
S Patnaik, S Chattopadhyaya, S Shankar - AIP Conference …, 2022 - pubs.aip.org
Dissimilar metals joining different alloys, thermoplastic and composites is a challenging task
due to their dissimilar characteristics and material incompatibility. Friction Stir Welding …
due to their dissimilar characteristics and material incompatibility. Friction Stir Welding …
Enhanced mechanical properties of 70/30 brass joint by rapid cooling friction stir welding
N Xu, R Ueji, H Fujii - Materials Science and Engineering: A, 2014 - Elsevier
The effect of rapid cooling on the microstructure, texture and mechanical properties of friction
stir welded 70/30 brass was investigated. Liquid CO 2 was used as the cooling medium …
stir welded 70/30 brass was investigated. Liquid CO 2 was used as the cooling medium …
[PDF][PDF] Microstructural and mechanical characteristics of Pure-Cu/brass dissimilar joints welded by friction stir welding using various process parameters
FSW (friction stir welding) is a solid-state joining method that attracts interest from all
industries. e influence of various tool rotational speeds on the microstructure and …
industries. e influence of various tool rotational speeds on the microstructure and …
Microstructure and mechanical characterization of friction-stir-welded dual-phase brass
Friction stir welding (FSW) is an ideal process to join brass to avoid the evaporation of zinc.
In the present investigation, 6-mm-thick dual-phase brass plates were joined efficiently using …
In the present investigation, 6-mm-thick dual-phase brass plates were joined efficiently using …
Friction stir welding of cast aluminum alloy (A319): Effect of process parameters
Due to their light weight and cast ability, cast aluminium alloys are gradually being used in
aerospace and automotive applications. Welding aluminium castings together for variety of …
aerospace and automotive applications. Welding aluminium castings together for variety of …
The microstructure and mechanical properties of friction stir welded Cu–30Zn brass alloys
YF Sun, N Xu, H Fujii - Materials Science and Engineering: A, 2014 - Elsevier
The optimized processing map for the friction stir welding of commercial 2 mm-thick single
phase Cu–30Zn brass alloy plates was obtained, which included a welding speed that …
phase Cu–30Zn brass alloy plates was obtained, which included a welding speed that …
Microstructure evolution of Cu–30Zn during friction stir welding
XC Liu, YF Sun, T Nagira, K Ushioda, H Fujii - Journal of Materials Science, 2018 - Springer
The microstructure evolution of Cu–30Zn during the deformation and cooling stages of
friction stir welding was separately investigated by employing the in-process rapid cooling …
friction stir welding was separately investigated by employing the in-process rapid cooling …