Abstract Effect of trace amount of Sc and Zr on microstructure and mechanical properties of
novel Al–Zn–Mg–Cu–Sc–Zr alloys are investigated. The samples were subjected to different …

Scandium is the first of the transition elements and occupies an intermediate position
between the typical rare-earth elements and the light metallic elements. The most significant …

High strength and low corrosion resistance are always the contradiction in Al-Si-Cu-Mg cast
alloy due to introducing high Cu and Mg levels. In this work, the new strategy was achieved …

The aim of the present study is to investigate the effect of accumulative roll bonding (ARB)
and precipitation hardening on the microstructure development and there of mechanical …

The effects of adding the alloy element Sc to Al alloys on strengthening, recrystallization and
modification of the grain microstructure have been investigated. The combination of Sc and …

This study reports on the electrodeposition of Al from AlCl3/1-ethyl-3-methylimidazolium
chloride (EMIC) ionic liquid, with the aim at determination of the mechanism applied and …

A salt base exothermic reaction process has been employed to produce aluminum alloy
2014 matrix-TiB2 composites using an exothermic reaction process at 850° C using K2TiF6 …

In this paper the influence of small scandium additions (< 0.26 wt.%) on the corrosion
properties of the high-strength Al–Zn–Mg–Cu alloy AA7010 is investigated. The addition of …

This paper presents the results of studying the thermal stability of the grain structure,
mechanical properties, and specific electrical resistivity of the Al-0.5 wt% Mg-x Sc ultrafine …

Whether selective laser melting (SLM) printed AlMgScZrMn alloy possesses more excellent
performances than other processing routes was unknown. In the study, the microstructures …