Al–Al2O3 composite coatings with different Al2O3 particle shapes were prepared on Si and
Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al2O3) …

Selective laser melting was considered in this study with the goal to manufacture dense
parts with mechanical properties comparable to those of bulk materials, directly from FeAl …

In this paper, an iron/aluminum composite coating was deposited by cold spraying using
iron and aluminum powder mixtures. The coating was annealed at different temperatures to …

Abstract Al+ SiC, Al+ Al 2 O 3 composites as well as pure Al, SiC, and Al 2 O 3 coatings were
prepared on Si substrates by the cold gas dynamic spray process (CGDS or cold spray). The …

The microstructure and mechanical properties of the Fe 3 Al–0.35 Zr–0.1 B alloy fabricated
by the Laser Engineered Net Shaping (LENS) technique are presented. Proper …

A new cold spray coating technique for thick Al coating with finely dispersed Al–Ni
intermetallic compounds was tested. For easy powder preparation and high yield, rather …

FeAl intermetallic composite coating using Al 2 O 3 as an additive has been fabricated by
atmospheric plasma spraying. The microstructure and mechanical properties of the FeAl/Al 2 …

We present an additive manufacturing of thin-walled Fe-Al samples using the Laser
Engineered Net Shaping (LENS) technique. Samples in the form of thin walls, ranging from …

Al coatings by cold gas dynamic spray (CGDS, or Cold Spray) technique with pressure
condition were investigated. The relatively soft Al has been coated at low gas pressure …

The principle aim of this study is to investigate the wear behaviour of FeCr coatings on Ni-
based bond deposited plain carbon steel substrate for several applications in power …