Macroporous silicon carbide is widely used in various industrial applications including
filtration for gas and water, absorption, catalyst supports, concentrated solar power …

Abstract The porous SiC-Mullite porous ceramics with different pore size were prepared by
SiC particles, kaolin, Al (OH) 3, and flake graphite, V 2 O 5 and AlF 3 were used as …

Permeating behaviour is one of the most important factors of porous ceramics used for
gas/liquid filters or membrane/catalysis supporters. Insufficient research has reported on the …

In the present work, mullite-bonded porous SiC ceramics were fabricated using reaction
bonding techniques. The morphologies, phase composition, open porosity, pore size …

The effects of the boron nitride (BN) content on the electrical, thermal, and mechanical
properties of porous SiC ceramics were investigated in N 2 and Ar atmospheres. The …

The high processing cost is the key challenge for the economic industrial use of SiC
membrane The aim of this research was to fabricate mullite bonded porous SiC ceramic …

In this study, macroporous SiC ceramics were fabricated via in situ liquid-phase bonding
using an Al 2 O 3–Y 2 O 3–SiO 2 bonding additive at 1500° C. The pore size of the ceramics …

The effects of the boron carbide (B4C) content and sintering atmosphere on the electrical,
thermal, and mechanical properties of porous silicon carbide (SiC) ceramics were …

Mullite-bonded porous silicon carbide ceramics were prepared by an in situ reaction
bonding technique and sintering in air with SiC, porous Al 2 O 3, and graphite as starting …

Sodium-contained compounds are promising sintering additives for the low-temperature
preparation of reaction bonded SiC membranes. Although sodium-based sintering additives …